Home > Tools & Cases > Hand Tools > Cleaners / Degreasers > Super Wash Cleaner/ Degreaser
MG Chemicals MGC-406B Super Wash Cleaner/ Degreaser 15 oz
Quick Dry Super Wash Removes Flux From Your PCB In An Instant
MG Chemicals 406B-425G
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player |
What's special about this cleaner / degreaser?
MGC-406B Super Wash Cleaner/ Degreaser is an excellent choice for removing the residue from flux cleaner as well as the flux itself that may still be left behind on the printed circuit board. Super Wash is available in aerosol form and is dries very quickly, so your board is ready for use almost immediately after rinsing. |
Requires very little dry time, so you can work faster
- Works well to rinse off other slower drying solvents
- Use with the Hog Hair Cleaning Brushes (852 and 853) for maximum effectiveness
- Super Wash 406B is safe on plastics
- 100% ozone friendly
- Leaves behind no residue which means when you spray this, there is no more cleaning to do
- Non toxic means it is safe for users
- Non conductive aerosol
- One year warranty
* May not be used on live circuits as this is a flammable product
| Physical and Chemical Properties | |
|---|---|
| Weight : | 15 oz can weighs 1.35 lbs |
| Physical State : | Aerosol |
| Odor : | Mild hydrocarbon |
| Solubility : | Insoluble |
| Evaporation Rate : | Rapid |
| Boiling Point : | 55°C |
| Specific Gravity : | 0.80 |
| Vapor Pressure : | 47 PSI @ 21°C |
| Vapor Density : | 1.5 (Air = 1) |
| pH : | 7 |
| Stability and Reactivity | |
| Stability : | Stable at normal temperatures and pressures |
| Conditions to Avoid : | Temperatures over 40°C, ignition sources, and incompatible substances |
| Incompatibilities : | Alkali and alkaline earth metals; powdered aluminum, zinc, magnesium, and beryllium; and strong oxidizing agents |
| Polymerization : | Will not occur |
| Decomposition : | Halogens, halogen acids, possibly carbonyl halides, carbon dioxide, carbon monoxide |
| Exposure Controls | |
| Routes of Entry : | Eyes, ingestion, inhalation, and skin |
| Ventilation : | Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure limits |
| Personal Protection : | Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective clothing to prevent skin contact. Use a NIOSH approved respirator when necessary |
| Fire Fighting Measures | |
| Flash Point : | -29°C |
| LEL / UEL | 1 / 7 |
| Extinguishing Media : | Use water spray, dry chemical, carbon dioxide, or chemical foam |
| General Information : | Will burn if involved in a fire. Containers may explode in the heat of a fire. Highly flammable vapors are heavier than air and may accumulate in low areas. Flash back along vapor trail is possible |
| Hazards Identification | |
| WHMIS Codes : | A, B5, D2B |
| NFPA Ratings : | Health 2, Flammability 3, Reactivity 0 |
| HMIS Ratings : | Health 2, Flammability 4, Reactivity 0 |
| Eyes : | May cause mild eye irritation |
| Skin : | May cause mild skin irritation |
| Inhalation : | May cause irritation of respiratory tract. Vapor reduces amount of oxygen available for breathing |
| Ingestion : | Aspiration hazard. May cause weakness and gastrointestinal tract irritation |
| Chronic : | None known |
| PART # | DESCRIPTION | WEIGHT | PRICE |
| MGC-406B-425G | MG Chemicals Super Wash Cleaner | 1.35 lbs | |
| Accessories | |||
| MGC-852 | MG Chemicals Hog Hair Cleaning Brush | 0.3 lbs | |
| MGC-853 | MG Chemicals Large Hog Hair Cleaning Brush | 0.5 lbs | |
MANUALS -
- Super Wash Cleaner Degreaser Material Safety Data Sheet (PDF)
- Cleaner Degreaser Selection Chart (PDF)
- MG Chemicals Flux Removal AppGuide (PDF)
|
 Mini Tub Lint Free WipesFrom $6.75 per tub These wipes are sized perfectly for cleaning fibers after stripping prior to termination or fusion splicing, as well as for cleaning connector end-faces after polishing. |
 MGC-402A Super Duster Plus Spray From $9.12 MG Chemical’s MGC-402A-650 and MGC-402A-285 Super Duster 134a is ideal for removing microscopic dust, lint, and foreign particles from your computer, AV Equipment, printers, fax machines and any other equipment. This duster spray has the ability to get into hard to reach crevices and will leave behind zero residue. |
|
