Home > Fiber Optic Technology > Fiber Optic Cleaning Products > MCG-402A Super Duster Plus Spray
MCG-402A Super Duster Plus Spray
Keep Your Equipment Free From Dust and Debris With This Ozone Safe Spray
MG Chemical 402A Super Duster Plus Spray
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player
|
What's special about this duster spray ?
MG Chemical's MGC-402A-650 and MGC-402A-285 Super Duster 134a is ideal for removing microscopic dust, lint, and foreign particles from your computer, AV Equipment, printers, fax machines and any other equipment. This duster spray has the ability to get into hard to reach crevices and will leave behind zero residue. |
- Excellent for cleaning out hard to reach small crevices such as those found on your computer, keyboard, and fax machine
- Non-flammable gas reduces the risk of fire or flame when in use
- Available in 2 sizes: 10oz and 16 oz. to suit your individual needs
- Refill and special chrome plated trigger valve can be purchased as accessories
- 1 year manufacturer warranty
Accessories:
Duster Refill
MGC-402AR
Allows user precision control and greater comfort
Outputs 71.5 PSI of pressure.
The 402AR and Trigger Valve in combination offer both value and performance.
Chrome Plated Trigger Valve
MGC-402T
Allows user precision control and greater comfort. This high quality threaded chrome valve is for use with Cat# 402AR Super Duster Refill aerosol cans, and can be used over and over.
It simply screws onto the top of the can, and can be easily removed at any time later without damage to the valve or the can, even if the can's contents have not been depleted.
When used instead of standard valves, the Trigger Valve gives the user better control of flow, a higher maximum rate of flow, and increased comfort.
| General | |
| Weight : | 285 : 10oz (1 lb) |
|---|---|
| 450 : 16oz (1.4 lbs) | |
| Sizes Available : | 10oz, 16oz |
| Physical and Chemical Properties | |
| Physical State : | Aerosol |
| Odor : | Ethereal |
| Solubility : | 0.15% |
| Evaporation Rate : | 1 (ether = 1) |
| Boiling Point : | -26.2°C |
| Specific Gravity : | 1.22 |
| Vapor Pressure : | 86 PSI @ 21°C |
| Vapor Density : | 3.5 (Air = 1) |
| pH : | 7 |
| Environmental Impact Data : (percentage by weight) | |
| CFC : | 0 |
| HFC | <99 |
| Cl. Solv. | 0 |
| VOC : | 0 |
| HCFC : | 0 |
| ODP : | 0 |
| Stability and Reactivity | |
| Stability : | Stable at normal temperatures and pressures. Do not mix with oxygen or air above atmospheric pressure. Any source of high temperature, such as lit cigarettes, flames, or welding may yield toxic and/or corrosive decomposition products |
| Conditions to Avoid : | Temperatures over 40°C, ignition sources, and incompatible materials |
| Incompatibilities : | Alkali and alkaline earth metals, powdered aluminum, zinc, magnesium, and beryllium |
| Polymerization : | Will not occur |
| Decomposition : | Halogens, halogen acids, possibly carbonyl halides |
| Exposure Controls | |
| Routes of Entry : | Eyes, ingestion, inhalation, and skin |
| Ventilation : | Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure limits |
| Personal Protection : | Wear appropriate eyeglasses or chemical safety goggles. Wear Appropriate protective clothing to prevent skin contact. Use a NIOSH approved respirator when necessary |
| Fire Fighting Measures | |
| Auto-ignition Temperature : | > 750°C |
| Extinguishing Media : | Use water spray, dry chemical, carbon dioxide, or chemical foam |
| General information : | This material may become flammable when mixed with air under pressure and exposed to strong ignition sources. Containers may explode in the heat of a fire |
| Hazards Identification | |
| WHMIS Codes : | A |
| NFPA Ratings : | Health 1, Flammability 0, Reactivity 0 |
| HMIS Rating : | Health 1, Flammability 0, Reactivity 0 |
| Eyes : | Contact with eye may cause severe tissue damage because of frostbite |
| Skin : | Contact with liquid or escaping vapor can cause frostbite, indicating by pallor or redness, loss of sensation, and swelling |
| Inhalation : | Deliberate Inhalation of high concentrations of vapor should be avoided, as it is harmful. Deliberate inhalation, may result in cardiac symptoms, unconsciousness or death. This product is not recommended for intentional misuse or deliberate inhalation as death without warning may occur. Low in toxicity in concentrations up to 40000ppm. When oxygen levels in air are reduced to 12% - 14%, symptoms of asphyxiation will occur: loss of coordination, increased pulse rate, and deeper respiration |
| Ingestion : | Aspiration hazard. May cause irritation of the digestive tract |
| Chronic : | Over exposure may cause dizziness and loss of concentration. At higher levels, CNS depression and cardiac arrhythmia may result from exposure |
1 week lead time if the products are not in stock
| PART # | DESCRIPTION | WEIGHT | PRICE |
| MGC-402A-285 | MG Chemicals 402A-285G Super Duster 134 Plus 285g (10oz) | 1.001 lbs | |
| MGC-402A-450 | MG Chemicals 402A-450G Super Duster 134 Plus 450g (16oz) | 1.4 lbs | |
| MGC-402AR | MG Chemicals 402AR Duster Refill (10oz) | 1.001 lbs | |
| MGC-402T | Chrome Plated Trigger Valve | 0.6 lbs |
 RJ45 Dust CoverFrom $5.98 Qty 10 RJ45 dust covers snap into your RJ45 Keystone Jacks to keep them clean and free of dust. A build-up of dust or grime in your network jacks may interfere with your network connection and make your time connected less efficient. |
 Deep Wall Mount Swing Out Enclosures - Great Lakes From $891.61 These 32" deep wall mounts are both versatile and easy to equip. They are a 9001:2000 certified product manufactured in the USA, and made of steel with either an optional plexiglass or steel door. |
 MGC-422 and MGC-422A Silicone Conformal Spray From $-1.00 MG Chemical’s MGC-422 and MGC-422A Silicone Conformal Coating provides a clear tough protective coating designed to protect your circuit boards and electrical components. This product comes in handy pen size all the up to 4L drum size, to suite small to large applications. |
 MGC-409 Electrosolve Contact CleanerFrom $7.49 MG Chemical’s MGC-409B Electrosolve Contact Cleaner is a powerful and effective cleaning tool that rapidly penetrates and dissolves many types of soil. This is the perfect cleaner when zero residue contact is required for clear connections. This product is flammable and so caution must be used. |
 MG Chemicals Super Wash Cleaner / Degreaser Price $16.02 MGC-406B Super Wash Cleaner / Degreaser is an excellent choice for removing the residue from flux cleaner as well as the flux itself that may still be left behind on the printed circuit board. Super Wash is available in aerosol form and is dries very quickly, so your board is ready for use almost immediately after rinsing. |
|
