Home > Tools & Cases > Hand Tools > Cleaners / Degreasers > Super Cold 134A
MGC-403A Super Cold 134A
Freezes to -51°C On Contact
Close Window
MGC-403A Super Cold 134A
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player
|
What's special about this spray ?
MGC-403A Super Cold 134A Spray is made for finding thermal or "hot" intermittent faults on your electronic components, PCB cracks, and cold solder joints. In addition, the frigid air protects heat-sensitive components during soldering. As an added benefit, the spray will freeze gum, glues and adhesives so that you can remove it effortlessly. |
Excellent at locating thermal or “hot” intermittent faults on your electronic components and physical cracks in your 
- An ozone safe aerosol which means its good for the planet
- Locates physical cracks in your PCB board circuitry
- Freezes glues and adhesives for quick and easy clean up
- Non flammable and non conductive
- Leaves no residue behind which means you are not having to clean up after use
- The valve has variable spray control so you decide how little or how much to use
| Physical and Chemical Properties | |
|---|---|
| Physical State : | Aerosol |
| Odor : | Ethereal |
| Solubility : | 0.15% |
| Evaporation Rate : | 1 (Ether = 1) |
| Boiling Point : | -26.2°C |
| Specific Gravity : | 1.22 |
| Vapor Pressure : | 86 PSI @ 21°C |
| Vapor Density : | 3.5 (Air = 1) |
| pH : | 7 |
| Stability and Reactivity | |
| Stability : | Stable at normal temperatures and pressures. Do not mix with oxygen or air above atmospheric pressure. Any source of high temperature, such as lit cigarettes, flames, or welding may yield toxic and/or corrosive decomposition products |
| Conditions to Avoid : | Temperatures over 40°C, ignition sources, and incompatible materials |
| Incompatibilities : | Alkali and alkaline earth metals, powdered aluminum, zinc, magnesium, and beryllium |
| Polymerization : | Will not occur |
| Decomposition : | Halogens, halogen acids, possibly carbonyl halides |
| Environmental Impact Data : (Percentage by Weight) | |
| CFC : | 0 |
| HFC : | 100 |
| Cl. Solv. : | 0 |
| VOC : | 0 |
| HCFC : | 0 |
| ODP : | 0 |
| Exposure Control | |
| Routes of Entry : | Eyes, ingestion, inhalation, and skin |
| Ventilation : | Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure limits |
| Personal Protection : | Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective clothing to prevent skin contact. Use a NIOSH approved respirator when necessary |
| Fire Fighting Measures | |
| Auto-ignition Temperature : | > 750°C |
| Extinguishing Media : | Use water spray, dry chemical, carbon dioxide, or chemical foam |
| General Information : | This material may become flammable when mixed with air under pressure and exposed to strong ignition sources. Containers may explode in the heat of a fire |
| Hazards Identification | |
| WHMIS Codes : | A |
| NFPA Ratings : | Health 1, Flammability 0, Reactivity 0 |
| HMIS Ratings : | Health 1, Flammability 0, Reactivity 0 |
| Eyes : | Contact with eye may cause severe tissue damage because of frostbite |
| Skin : | Contact with liquid or escaping vapor can cause frostbite, indicated by pallor or redness, loss of sensation, and swelling |
| Inhalation : | Low in toxicity in concentrations up to 40000ppm. When oxygen levels in air are reduced to 12% - 14% symptoms of asphyxiation will occur: loss of coordination, increased pulse rate, and deeper respiration |
| Ingestion : | Improbable due to low boiling point (-26.2C) |
| Chronic : | Over exposure may cause dizziness and loss of concentration. At higher levels, CNS depression and cardiac arrhythmia may result from exposure |
| PART # | DESCRIPTION | WEIGHT | PRICE |
| MGC-403A-285 | MG Chemicals Super Cold 285g (10 oz) | 1 lb | |
| MGC-403A-400 | MG Chemicals Super Cold 400g (14 oz) | 1.4 lbs |
REVIEWS
Reviewed by 2 customers
Sort by
Displaying reviews 1-2
Pros
- Works every time
Cons
- none
Best Uses
- Electronic troubleshootin
Test components that fail at various temperatures.
Calibrate digital thermometers.
Product simply works the way it is supposed to work and the way it always has worked. No more, no less. It's cool spray.
Displaying reviews 1-2
 MGC-409 Electrosolve Contact CleanerFrom $7.49 MG Chemical’s MGC-409B Electrosolve Contact Cleaner is a powerful and effective cleaning tool that rapidly penetrates and dissolves many types of soil. This is the perfect cleaner when zero residue contact is required for clear connections. This product is flammable and so caution must be used. |
 Breaker Sniff-It Type2WAS SALE $46.74 The Breaker Sniff-It Type2 digital circuit breaker locator "sniffs out" circuits without turning off the breakers! |
 Deerskin Work GlovesPrice $43.72 Premium deerskin, soft and form-fitting for maximum comfort. Gunn cut with seams away from wear surfaces. Inseam index finger. Sheep-like pile lining. |
 Protective EyewearPrice $11.88 Permanently bonded anti-fog coating minimizes lens fogging in almost any environment, anti-scratch coating for superior scratch resistance, anti-UV coating blocks 99.9% of UVA and UVB radiation. |
