MG Chemicals MGC-860 Silicone Heat Transfer Compound

Keep Heat From Damaging Your Valuable PC Boards

Silicone Heat Transfer

Close Window

MG Chemicals MGC-860 Silicone Heat Transfer Compound

    Additional Images
  •  - icon
  •  - icon

This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player
Copyright ©2014 CableOrganizer.com

Low Price GuaranteeWhat's special about this silicone compound?

  • Transfers heat away from your electronic items such as: transistors, semi-conductors devices, ballasts (from simple to complex), and other electrical items to avoid damage and overheating
  • Will not become brittle when it dries so that its high thermal conductivity remains strong
  • High dielectric constant means your electronic component keeps its charge for longer periods of time
  • Click for More Features

MGC-860 MG Chemicals Silicone Heat Transfer Compound is highly conductive and will not harden when it dries. It is made for transferring heat away from all types of electrical and electronic devices. Excellent for use with heat sinks, transistors, semi-conductors and more.

  • When properly applied there are no gaps between the surfaces and good thermal conductivity is maintained
  • Excellent for use with heat sinks, which will in turn protect your electronic from thermal damage
  • One year manufacturer warranty


   Physical Properties
  Test Method Non Silicone
8610
Silicone
860
Appearance Visual Off white / smooth paste White paste
Consistency ASTM D 217 310-320  
Specific Gravity
@ 25°C (77°F)
  2.5 min 2.3 min
Bleed %
24 hours @ 200°C
FTM-321 1.0% max 2.0% max
Bleed %
24 hours @ 200°C
FTM-321 1.0% max 2.0% max
Evaporation
24 hours @ 200°C
ASTM D-566 > 500°F (260°C)  
Max. operating temp.   200°C 200°C (consistent)
300°C intermittent
 
   Electrical Properties
  Test Method Non Silicone
8610
Silicone
860
Thermal Conductivity Hot Wire Method Heat Flow #36 °C 18.48 x 10-4 (K Factor, Cal/Sec cm•K) 0.657 W/m•K
Dielectric Strength
(0.05l gap)
ASTM D-149 350 V/MIL 400 V/MIL
Dielectric Constant @ 1000 Hz ASTM D- 150 4.4 3.81
Dissipation Factor
@ 1000 Hz
ASTM D 150 0.0021 0.0032
Resistivity @ 21°C ASTM D 150 6.38 x 1013 Ohm/cm 1.5 x 1015 Ohm/cm
PART # DESCRIPTION SHIPPING WEIGHT PRICE
MGC-860-60G MG Chemicals Silicone Heat Transfer Compound 2oz 0.7 lbs
Qty:  
MGC-860-150G MG Chemicals Silicone Heat Transfer Compound 5oz 1.01 lbs
Qty:  
MGC-860-1P MG Chemicals Silicone Heat Transfer Compound 2.5 lbs 3.0 lbs
Qty:  
Hazards Identification
WHMIS Codes D2B
NFPA RatingsHealth 1  Flammability 0  Reactivity 0
HMIS RatingsHealth 1  Flammability 0  Reactivity 0
Eyes Causes moderate eye irritation
SkinMay cause mild skin irritation
InhalationPossible dust hazard if particles are separated from the polymeric matrix
IngestionNone Known
ChronicNone Known
 
Fire Fighting Measures
Auto-ignition Temperature N/E
Flash Point260° C
LEL / UELN/A
Extinguishing MediaAll standard extinguishing media
General InformationWill burn if involved in a fire
 
Exposure Controls
Routes of Entry Eyes, ingestion, inhalation, and skin
VentilationNot required
Personal ProtectionWear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective clothing to prevent skin contact.
 
Physical and Chemical Properties
Physical StatePaste
Odor Odorless
Solubility Insoluble
Evaporation Rate N/A
Boiling Point 300° C
Specific Gravity 2.4
Vapor Pressure N/A
Vapor Density N/A
pH N/A
 
Stability and Reactivity
Stability Stable at normal temperatures and pressures
Conditions to avoid Incompatible substances
Incompatibilities Oxidizing agents
Polymerization Will not occur
Decomposition Carbon monoxide, carbon dioxide, silicone dioxide, formaldehyde

 

RELATED ARTICLES -



 

VIEW OUR GLOSSARY

MGC-409 Electrosolve Contact CleanerMGC-409 Electrosolve Contact Cleaner
From
MG Chemical’s MGC-409B Electrosolve Contact Cleaner is a powerful and effective cleaning tool that rapidly penetrates and dissolves many types of soil. This is the perfect cleaner when zero residue contact is required for clear connections. This product is flammable and so caution must be used.
MGC-422 and MGC-422A Silicone Conformal SprayMGC-422 and MGC-422A Silicone Conformal Spray
From
MG Chemical’s MGC-422 and MGC-422A Silicone Conformal Coating provides a clear tough protective coating designed to protect your circuit boards and electrical components. This product comes in handy pen size all the up to 4L drum size, to suite small to large applications.
 
   

What can make this page better?

We do everything we can think of to provide you with the product specs, images and ordering info you need, but if we’re missing something or still have room to improve, please let us know. Your comments, suggestions and questions are the best tools we have for serving you better!