Home > Cord Covers > Medium Capacity Cord Covers > MegaDuct Cord and Hose Cover or Bumper
Heavy Duty Cord and Hose Cover
Prevent Tripping Hazards While Maintaining The Integrity Of Your Cables
MegaDuct Cord and Hose Cover or Bumper
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player |
What's special about the MegaDuct?
The MegaDuct heavy-duty cord and hose covers by Geist are multifunctional, yet simple in design. These flexible and durable cord, wire and hose protectors can be placed horizontally on posts or poles to protect vehicle doors in parking lots or even uses as bumpers on garage floors to mark the proper stopping point. |
- For an alternate use, attach the MegaDuct to poles or posts to protect vehicles in parking garages or traffic areas
- Two colors available: Black to blend in with surroundings, or Yellow to visually caution pedestrians and motorists
- Great addition to your office, home, warehouse, garage or any other place that your cables need a little more protection
- Available in 3 or 5 foot lengths, and can be used in tandem for longer cabling or hose runs
The MegaDuct cord cover can be used for protection and hazard reduction in a variety of non-standard applications. For example, the MegaDuct bumper material can be mounted vertically as a protective bumper on poles or posts, to protect vehicles in tight parking or traffic areas, or as a truck or boat bumper at loading docks and boating facilities.
| PART # | DESCRIPTION | COLOR | SHIPPING WEIGHT | PRICE |
| MD-3 | MegaDuct 3 ft. length | Black, Yellow | 6.0 lbs | |
| MD-5 | MegaDuct 5 ft. length | Black, Yellow | 9.5 lbs |
Technical Specifications
| Part Number | MD-3 | MD-5 |
| Price | ||
| Colors | Black or Yellow | Black or Yellow |
| Weight | 6 lbs | 9.5 lbs |
| Material | PVC | PVC |
| Total Height | 1.7" (43mm) | 1.7" (43mm) |
| Total Width | 5.6" (142mm) | 5.6" (142mm) |
| Center Channel Height | 1.25" (32mm) | 1.25" (32mm) |
| Center Channel Width | 2" (51mm) | 2" (51mm) |
| Outer Channel Height | 0.75" (19mm) | 0.75" (19mm) |
Center Channel Removal Option:
To accommodate large cords with plugs, the center channel may be removed. Using a knife, box cutter, or other sharp blade, safely slice approximately 2 inches along the pre-scored lines on the bottom of the MegaDuct. Use pliers to grip the end of the cut piece and pull the center channel out along the remaining length of the duct.
RELATED ARTICLES -
HOW-TO CORNER -
REVIEW SNAPSHOT®
by PowerReviews(based on 1 review)
Ratings Distribution
REVIEWS
Reviewed by 1 customer
Displaying review 1
Pros
- Durable
- Easy To Install
- Fits Multiple Cable Sizes
- Great Fit
- Great Protection
Cons
Best Uses
- Big Office
- Small Office
Comments about MegaDuct Cord Cover 3 ft. length:
Replaced the flimsy stuff from the major retailer with this. Worked perfect. All the cables fit, it stayed in place without curling, and is heavy enough to protect the cables. [...]
Displaying review 1
 Wiremold Plastic Cord ProtectorFrom $12.99 You know you need something to keep people from tripping on your cords but they are often hard to find. With these rubber cord protectors, you can run several wires through it, cut the strip down to size and use double sided tape or Velcro hook tape to keep the cord cover in place. |
 Floor Cord Cover KitFrom $8.53 Is the ideal way to keep from tripping on loose cables and cords running across a walkway or behind your desk. The 'Rounded' surface helps when moving carts over wires. Cover, hide and protect cords and cables while keeping floors clear and safe. |
 SafCord Cord CoversFrom $30.00 SafCord Cord Covers provide a solution to securing electrical and data cables to looped carpet. This innovative hook and loop method allows you to fasten the cords in place without the use of adhesives that could damage your carpet. |
 Flexiduct Transparent Cord ProtectorFrom $19.99 |
