Home Power & Data Distribution Electrical Switches Maestro™ IR Dimmer Controls
Lutron® Maestro™ IR Dimmers
Control Your Lights From as Much as 30' Away, Even From Another Room!
![]()
Close Window
Lutron® Maestro™ IR Dimmers
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player Smart Dimmer | IR Remote |
Innovative microprocessor technology is evident in the Maestro™ IR dimmer. Not only is the dimmer convenient (thanks to its remote control), it also saves energy and extends the life of your lamps. This dimmer is specifically designed to control many different light sources including: incandescent, halogen, magnetic low voltage transformers, and electronic low voltage transformers, to meet all of your needs. |
- Single-Gang wall plates are included
- Compatible with most learning remote controls
- Softly lit LEDs allow you to see where your dimmer is in the dark, as well as what the setting is
- Full-range dimming possible from up to ten locations
- Multi-location dimming compatible with 3-way wiring for easy installation and retrofit
- Able to suppress/ block interference from radio and TV signals thanks to RFI suppression circuitry
- Provide a minimum high-end of 92% of line voltage for incandescent and magnetic low-voltage loads
- UL1472 section 5.11 rated
- With two easy taps on the silver button you have full brightness
- Easy to use remote control functions in the same manner as the base unit
- Front accessible Service Switch (FASS™) to disconnect the load from power
- You can use the wireless remote anywhere, even in your car. Carry it with you, or place it on a tabletop
- One-year manufacturer’s warranty
- The wireless remote can operate up to three dimmers and each dimmer can be controlled with up to four controllers
- There are more than a half-million unique addresses which means your neighbor’s wireless signal will not interfere with yours
- Installation is quick and easy, and can replace an existing switch in as little as 15 minutes
NOTE: Not for use with mechanical 3-way or 4-way switches. For multi-location dimming or switching, use one Meastro™ IR Multi-Location Dimmer and up to nine Maestro™ Accessory Dimmers or accessory switches. Derating is required if dimmers are ganged.
| Application | Single-pole incandescent/halogen, 120 volts |
|---|---|
| Operating Temperature | 0° - 40° C (32° - 104° F) and 90% non-condensing relative humidity |
| Wattage | 120 Volt / 600 Watt (maximum load) |
| Optional Wattage | Call (866) 222-0030 for information |
- Utilize an easily recognizable air gap off, activated when user selects “off” at any control to disconnect the load from line supply eliminating any leakage current
- Designed and tested to withstand electrostatic discharges up to 16,000 V without impairment per IEC 801-2
- Designed and tested to withstand line-side surges without impairment to performance when subjected to surges of 6,000-volts, 200-amps per ANSI / IEEE C62.41C
- Ensure a precise color match between all plastic parts such that color variation does not exceed a delta E of 1.0 as defined in ASTM E 308-99
- Exhibits ultraviolet stability on all visible parts when tested with multiple actinic light sources as defined in ASTM D4674-89
- Fits a Claro™ decorator wall plate opening
- Fits a standard 2" wide electrical back-box in both single-gang and multi-gang applications
- Undergoes full-function and safety testing during manufacturing end-of-line
Please Call (866) 222-0030 For Additional Color Options
| PART # | DESCRIPTION | DIMENSIONS | CONTENTS | PRICE |
| LU-MIR-600-THW-WH | Lutron® Maestro™ IR Single-Location 600 Watt Dimmer - Gloss White | 2.94" W x 4.69" H x 0.30" D | (1) Single Location Smart Dimmer w/ IR receiver (1) IR transmitter (1) Claro wallplate | |
| LU-MIR-603-THW-WH | Lutron® Maestro™ IR Multi-Location 600 Watt Dimmer - Gloss White | 2.94" W x 4.69" H x 0.30" D | (1) Multi-Location Smart Dimmer w/ IR receiver (1) IR transmitter (2) Claro wallplates |
NOTE: Not for use with mechanical 3-way or 4-way switches. For multi-location dimming or switching, use one Meastro™ IR Multi-Location Dimmer and up to nine Maestro™ Accessory Dimmers or accessory switches. Derating is required if dimmers are ganged.
Select from the below list of available options to see it on the left.
NOTE: Due to differences in monitor settings, the examples show may vary slightly from the actual product.
NOTE: Not all options may be represented.
MANUALS / BROCHURES -
- Maestro™ IR Dimmer Installation Manual PDF
English/Espanol - Maestro™ IR Brochure - Room Setup PDF

- Maestro™ IR Dimmer Brochure PDF

- Maestro™ Wireless Packages PDF
(call for ordering information) - Lutron's Guide to Dimmer Low-Voltage Lighting PDF

RELATED ARTICLES
- How Do You Know the Right Fuse for Your Circuit Protection Needs
- Energy Conservation Made Easy
- Creating a Fire Protection Plan for Your Business
- How to Identify a Counterfeit UL Mark
- Energy Saving Tips for Businesses
- 5 Things That Home Design Shows Don't Always Tell You
- History of Lutron




Facebook Comments