Klein Tools Insulated Screwdriver - Square-Recess Tip

• Large orange handles make the tools comfortable, easy to use and easily identifiable
• Two layers of insulation to protect up to 1000-volts

These tools meet or exceed ASTM F1505-01 and IEC 60900:2004, comply with NFPA-70E, 2004 ed., and are marked clearly with the 1000-volt rating symbol.

* Only use tools that are marked with the official international 1000-volt rating symbol if there is any chance that the tool will make contact with an energized source.

WARNINGS:
- Always wear approved eye protection.
- Always inspect your tools before use. Do not use if orange coating cracks, breaks, or becomes damaged. Destroy tool if white layer shows through orange layer. Whenever possible, always de-energize lines and equipment prior to working on them. These tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- Do NOT use to pry or chisel.

RELATED ARTICLES -

• History of Klein Tools

HOW-TO CORNER -

• How to Safely Use & Care for Klein Insulated Tools