IDEAL TKO™ Carbide Tipped Hole Cutters

The Efficient and Precise Alternative To Time Consuming Knockouts and Standard Hole Saws

Low Price Guarantee

ID-36-311   

What's special about these carbide hole saws?

  • Includes the SmoothStart™ pilot drill bit which gradually guides the hole saw into place, preventing damage to the carbide tips and limiting unnecessary dulling or wear
  • Carbide teeth are precision-ground for maximum sharpness, allowing you to cut clean, round holes through sheet metal faster and neater than with a standard hole  saw
  • Built-in over drill flange prevents the holesaw from completely passing through the sheet metal, eliminating scraped knuckles and damage to the drill or hole
  • Click for More Features

The new TKO™ carbide-tipped hole cutters from IDEAL provide installers with a better way to efficiently cut clean, accurate holes through sheet metal and stainless steel. More

Images

PART # DESCRIPTION WEIGHT PRICE
TKO™ Hole Cutter Kits with Carrying Case
ID-36-311 TKO 4-piece Carbide Hole Cutter Kit: 7/8", 1 1/8", 1 3/8", SmoothStart Replacement Bit 1.30 lbs
Qty:  
ID-36-314 TKO Master Electrician's Kit: 7/8", 1 1/8", 1 3/8", 1 3/4", 2" , 2 1/2", Two SmoothStart Replacement Bits 4.75 lbs
Qty:  
Hole Saws and Replacement Bits
ID-36-300 IDEAL TKO™ Carbide Tipped Hole Cutter 3/4 inch 0.20 lb
Qty:  
ID-36-301 IDEAL TKO™ Carbide Tipped Hole Cutter 7/8 inch 0.25 lb
Qty:  
ID-36-302 IDEAL TKO™ Carbide Tipped Hole Cutter 1 inch 0.35 lb
Qty:  
ID-36-303 IDEAL TKO™ Carbide Tipped Hole Cutter 1 1/8 inch 0.35 lb
Qty:  
ID-36-313 IDEAL TKO™ Carbide Tipped Hole Cutter 1 7/32 inch 0.40 lb
Qty:  
ID-36-304 IDEAL TKO™ Carbide Tipped Hole Cutter 1 1/4 inch 0.40 lb
Qty:  
ID-36-305 IDEAL TKO™ Carbide Tipped Hole Cutter 1 3/8 inch 0.45 lb
Qty:  
ID-36-306 IDEAL TKO™ Carbide Tipped Hole Cutter 1 7/16 inch 0.50 lb
Qty:  
ID-36-307 IDEAL TKO™ Carbide Tipped Hole Cutter 1 1/2 inch 0.50 lb
Qty:  
ID-36-308 IDEAL TKO™ Carbide Tipped Hole Cutter 1 3/4 inch 0.65 lb
Qty:  
ID-36-309 IDEAL TKO™ Carbide Tipped Hole Cutter 2 inch 0.75 lb
Qty:  
ID-36-310 IDEAL TKO™ Carbide Tipped Hole Cutter 2 1/2 inch 1.05 lbs
Qty:  
ID-36-312 IDEAL TKO™ SmoothStart Replacement Drill Bit 0.05 lb
Qty:  

When it comes to quality, performance and durability, these carbide-tipped hole cutters are the IDEAL choice for the professional installer. With fine-grained carbide tips and the exclusive SmoothStart™ pilot drill bit and integral arbor, these hole saws outperform the competition in a fraction of the time.

  • SmoothStart™ drill bit is equipped with an ejection spring, which effortlessly releases the slug after drilling each hole, saving you time and labor, especially on larger applications
  • Carbide tips provide lasting sharpness that outperforms HSS cutters and bi-metal hole saws, especially in sheet steel
  • High performance carbide tips and professional grade design ensure that your holes stay accurate, round and clean, even after your 200th hole through stainless steel
  • Available in a full range of sizes from 3/4" to 2-1/2" to accommodate any size job or conduit installation
  • Integral arbor provides increased rigidity to eliminate excess vibration, resulting in a smoother, more accurate hole

 

PART # HOLE SIZE CONDUIT & PIPE SIZE WEIGHT 36-311 KIT INCLUDES 36-314 KIT INCLUDES
ID-36-300 3/4" - 0.20 lb 0 0
ID-36-301 7/8" 1/2" & 22mm pushbutton 0.25 lb 1 1
ID-36-302 1" - 0.35 lb 0 0
ID-36-303 1-1/8" 3/4" 0.35 lb 1 1
ID-36-313 1-7/32" 30mm pushbutton 0.40 lb 0 0
ID-36-304 1-1/4" - 0.40 lb 0 0
ID-36-305 1-3/8" 1" 0.45 lb 1 1
ID-36-306 1-7/16" - 0.50 lb 0 0
ID-36-307 1-1/2" - 0.50 lb 0 0
ID-36-308 1-3/4" 1 1/4" 0.65 lb 0 1
ID-36-309 2" 1 1/2" 0.75 lb 0 1
ID-36-310 2-1/2" 2" 1.05 lbs 0 1
ID-36-312 Pilot Hole - 0.05 lb 1 2
Carrying Case - - - 1 1

RELATED ARTICLES -

 

VIEW OUR GLOSSARY

 

Milwaukee Hole Saw SetMilwaukee 10pc Electricians Ice Hardened™ Hole Saw Set
From
Thanks to a proprietary cryogenic hardening process, these hole saws are tough enough to last 50% longer than those that are heat treated.

Slug-SplitterSlug-Splitter® Ram and Hand Pump Hydraulic Driver Punch Kit
From
This easy to operate pump driver can go through up to 10 gauge (3.5 mm) stainless steel, depending on the individual punch capacity rings. Model GL-7506 has an 11-ton hydraulic ram that can make a 1/2 " to 2" opening.

Do you have any question about this product?
Let our experts and customers resolve all your doubts

Did you know that we can give you a quote for most of our products, including shipping?


You can also call us toll free 866.222.0030

What can make this page better?

We do everything we can think of to provide you with the product specs, images and ordering info you need, but if we're missing something or still have room to improve, please let us know. Your comments, suggestions and questions are the best tools we have for serving you better!