Home Theater System Racks
Your home theater system components have to be placed into either a standard entertainment center, on shelves or in system racks. After all, they have to have a location where they can be connected to the output devices such as the high definition television and surround sound speaker system. If you find that you frequently need to access the wiring, connectors, and plugs in the rear of your home theater entertainment system, you almost certainly find this frustrating. It is a lot of trouble and labor, and often there isn't enough wire to slide the components out to reach behind and disconnect cabling.
The simple, easy solution to this difficult problem is the use of rotating home theater system racks. By employing a rotating rack for holding your components, you have the ability to swing the rack 90 degrees to gain rear access. A top-quality equipment rack will allow you to lock the equipment into position you desire, whether that is the installed position of 0 degrees, partially exposed at 60 degrees, or fully accessible in a 90 degree position, to prevent the equipment rack swinging while you are connecting, disconnecting or adjusting cables or wiring, or while you are moving components.
Home theater system rotating equipment racks of the quality that will best suit your needs should include the ability to swing the equipment in either direction so that if you move the furniture nearby or the home theater system, you can change the direction in which the rack moves when swing into a position to allow equipment access. Shop for a rotating rack that is constructed of cold rolled steel to ensure strength and prevent warping even when filled with home entertainment equipment. Choose eleven gauge steel; do not consider any system rack that is flimsy because it could topple, taking all your valuable equipment with it. A rack system should include 10-32 Electronic Industries Association (EIA) compliant threaded rack rails which means the components can be mounted quickly and easily. The rack should employ ball bearings in the construction so that it swivels smoothly.
Home theater rack systems are rated with the amount of weight a particular model can support without danger of failure or warping. It is a good idea to select a rack rated for 250 pounds minimum; it is surprising how much components weight when all the weights are totaled. Quality component racks include cable support so that all the cables can be easily managed. The rack should lock into place when closed and some even allow you to lock your equipment in place to deter theft.
Home theater component equipment racks are available in a selection of depths. Measure the component that is longest from front to rear and select the rack depth that best suits your needs. Commonly, you will find racks available in 19-inch and 23-inch depths. Choose a rack that is powder coated to protect the metal.
You should choose a system rack that has adjustable shelves so that you can position the equipment into your rack perfectly or select a rack that has plenty of room between shelves. It is very important that air be able to circulate between pieces of equipment to prevent overheating. Some component racks for home theater systems have solid metal shelves; others have ventilated shelves. As long as the components are not crowded to closely, either type of shelf should perform perfectly.
An equipment rack for your home theater system gives your equipment that professional, finished look. The ability to swing the component rack to access the rear of your home entertainment system will be invaluable whenever you add, remove, or change components. The savings in time and energy, as well as stress, will pay off if you select a top-quality rotating equipment rack for your home theater system.