Home Fiber Optic Technology Fiber Optic Cabinet, Enclosures, Housings FTTX Fiber Optic Cabinets - Hoffman
Hoffman FTTX Fiber Optic Cabinets
Perfect Way to Protect and Manage Fibers
Close Window
Hoffman FTTX Fiber Optic Cabinets
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player
|
Hoffman FTTX enclosures are designed to protect and manage fiber optic cable for broadband delivery in outdoor applications. Constructed with welded aluminum and coated with polyester powder paint, these enclosures provide long-lasting protection in extreme outdoor applications. |
- Standard pitched roof promotes water runoff
- Available with either single or dual access doors on front and rear for convenient access
- 3-point latching mechanisms and padlocking handles on doors provide security
- Seamless foam-in-place gasket seals doors against moisture and dust
- Wind latch mechanisms on doors control door when open for equipment maintenance
- Removable lifting lugs (2) for easy installation
- Rack angles adjustable for 19 inch or 23 inch spacing without modifications
- Cabinet top insulation helps prevent the formation of condensation and reduce solar gain inside. Side insulation is optional
- Base of cabinet has a 5” high aluminum mounting plinth to allow for cable alignment
- Three pyramidal boots provided at base of cabinet for sealing various sizes of cables
- All fasteners are stainless steel to maintain professional appearance in severe outdoor climate conditions
- Grounding bus bar provided
ACCESSORIES
Fiber Management Spools (HF-TOPTKSPL)
mount inside the cabinet and help maintain proper bends when routing cable. Molded of black plastic. Includes thread-forming M5 mounting screws. Slots provided on flange for cable wraps.
Splitter Chassis (HF-T1USPLTR / T2USPLTR / T3USPLTR / T5USPLTR)
provides mounting means and support for various sizes of fiber optic splitter modules. Capacities range from three 1 x 16 modules to nine 1 x 32 modules. All models mount on a standard 19” rack.
Pole Mounting Kits (HF-T11FTTXPMK & HF-T23FTTXPMK)
install on the rear of the single-access cabinets using the hardware provided. No drilling or tapping of the cabinet is required. Installation instructions are provided for mounting to various types of poles.
Custom Accessories:
- Fiber Optic Cable Management Accessories
- Fans
- Heat Exchangers
- Air Conditioners
- Electric Heaters DAH2001A, DAH1001A
- Fan and Heater Thermostats ATEMNC, ATEMNO
- Lighting Packages
- Fastener Packages
For Custom Accessories, please contact us at (866) 222-0030 for more information
Industry Standards
- UL 508A Type 3, 3R, 4, 4X, 12
- CSA Type3, 3R, 4, 4X, 12
- NEMA/EEMAC Type 3, 3R, 4, 4X, 12
- EC60529, IP66
- Designed to meet Telcordia NEBS™ GR-487, GR-63, and IEC 48D
- EIA 310-D with 19” spacing for rack equipment
- RoHS Compliant
| PART # | A (height) | B (width) | C (depth) | RU | WEIGHT |
| HF-T303020FTTX | 30" 762mm |
30" 762mm |
20" 508mm |
10 | 105 lbs |
| HF-T503020FTTX | 50" 1270mm |
30" 762mm |
20" 508mm |
22 | 135 lbs |
| HF-T303020FTTXDA | 30" 762mm |
30" 762mm |
20" 508mm |
10 | 110 lbs |
| HF-T503020FTTXDA | 50" 1270mm |
30" 762mm |
20" 508mm |
22 | 145 lbs |
| 50 Inch Tall Models | |
 |
 |
| Front 50" Dimensions | Side Specifications for 50" Cabinet |
| 30 Inch Tall Models | |
 |
 |
| Front 30" Dimensions | Section Z-Z Specifications |
 |
 |
| Bottom Drawing for 30" Cabinets | Section Y-Y Specifications |
| PART # | DESCRIPTION | RU | DIMENSIONS H x W x D |
WEIGHT | PRICE |
| HF-T303020FTTX | Hoffman Single Access 10RU FTTX Fiber Optic Cabinet | 10 RU | 29.5" x 30" x 20" | 105 lbs | |
| HF-T503020FTTX | Hoffman Single Access 22RU FTTX Fiber Optic Cabinet | 22 RU | 49.5" x 30" x 20" | 135 lbs | |
| HF-T303020FTTXDA | Hoffman Dual Access 10RU FTTX Fiber Optic Cabinet | 10 RU | 29.5" x 30" x 20" | 110 lbs | |
| HF-T503020FTTXDA | Hoffman Dual Access 22RU FTTX Fiber Optic Cabinet | 22 RU | 49.5" x 30" x 20" | 145 lbs |
ACCESSORIES
| PART # | DESCRIPTION | PRICE |
| HF-TOPTKSPL | Hoffman 1.18" [30mm] Radius Fiber Optic Spool - 4pk | |
| HF-T1USPLTR | Hoffman 1RU Splitter Chassis | |
| HF-T2USPLTR | Hoffman 2RU Splitter Chassis | |
| HF-T3USPLTR | Hoffman 3RU Splitter Chassis | |
| HF-T5USPLTR | Hoffman 5RU Splitter Chassis | |
| HF-T11FTTXPMK | Hoffman 11RU Cabinet Pole Mounting Kit | |
| HF-T23FTTXPMK | Hoffman 23RU Cabinet Pole Mounting Kit |
RELATED ARTICLES -
HOW-TO CORNER -
- How to Test Fiber Optics for Continuity
- How to Test Fiber Optic Cables for Optical Loss
- Thermal Management Best Practices - How to Calculate Ventilation Required to Provide an Interior Rack Temperature of 85°F
 Hoffman COMLINE® OSP Outdoor Wall Mount CabinetPrice $1,916.64 Hoffman is known as a leading provider of outside plant enclosures. These cabinets allow you to rack mount telecom equipment for DSL and fiber distribution applications, and conform to NEMA standards 3, 3R, 4, 4X, and 12. This Hoffman enclosure meets all industry standards for outdoor cabinets, and comes as a complete package, ready to use. |
 Neat Patch - Patch Cable ManagementFrom $72.65 Neat Patch's unique design enables the customer to store their excess patch cable into a neat and tidy compartment. Instead of wading-up the slack and stuffing it into a finger-duct, the end-user simply coils the excess and slides it into place. Neat-Patch supplies is a solution for networks that has never been offered until now, and that is compliant patch cable storage. |
 CORNING UniCam® ConnectorsFrom $13.68 Corning UniCam® connector is the perfect solution for all field installable multi mode and single mode fiber optic connector requirements. The quick installation reduces overall labor costs of connectorization making the Unicam connector cost effective for all fiber applications, from the main-cross connect to the workstation. UniCam Connectors can be installed in less than one minute, or one third the time of standard field-polish connectors. |
|
AFL FuseConnect™ Keyed LC Solutions
Facebook Comments