Home Cable Management Heat Shrink Heat Shrink Tubing 2:1 Heat Shrink 2:1 Adhesive Lined Technical Specifications
Technical Specifications - 2:1 Heat Shrink, Dual-Wall, Flexible, Polyolefin Tubing, Adhesive Lined
Features:
|
Standard:
|
Property | Test Method | Value | ||
---|---|---|---|---|
Physical | Unaged | Tensile strength | ASTM D 638 UL 224 |
Min. 1.1kgf/mm² |
Elongation | Min. 200% | |||
Aged | Tensile strength | ASTM D 638 UL 224 175°C/168hrs |
Min. 0.8kgf/mm² | |
Elongation | Min. 100% | |||
Density | ASTM D-792 | Max. 1.40g/cm²@23°C | ||
Heat Shock | MIL-I-23053 | Pass @ 250°Cx4hrs | ||
Low Temperature Flex | MIL-I-23053 | No crack @ -55°C | ||
Flexibility | 158°C/168 hrs | No crack | ||
Secant Modulus | UL 224 | Max. 173MPa | ||
Electrical | Dielectric Strength | UL 224 | Min. 2500V | |
Volume resistivity | UL 224 | Min. 1x1014Ω - cm | ||
Chemical | Copper Corrosion | MIL-I-23053 175°C/16hrs |
No Corrosion | |
Copper Stability Elongation |
UL 224 158C/16hrs |
UL 224 158C/16hrs |
No sign of degradation MIn. 100% |
|
Flammability (vW-1) | UL 224 | UL 224 | Pass |
Fully recovered after heating
Product Dimensions - Minimum Shrink Temperature: 90°C
SIZE | EXPANDED | RECOVERED | Standard Length |
||||||
Internal
Diameter Minimum (D) |
Internal
Diameter Maximum (d) |
Minimum
Total Wall Thickness (Total Wall) (T) |
Minimum
Wall Thickness (Adhesive Wall) (t) |
||||||
Inch Size | In. | mm | In. | mm | In. | mm | In. | mm | Ft. |
1/8” | 0.126 | 3.2 | .062 | 1.57 | 0.025 | 0.43 | 0.008 | 0.20 | 4 |
3/16” | 0.189 | 4.8 | .093 | 2.36 | 0.025 | 0.43 | 0.008 | 0.20 | 4 |
1/4” | 0.252 | 6.4 | .125 | 3.18 | 0.030 | 0.56 | 0.008 | 0.20 | 4 |
3/8” | 0.378 | 9.6 | .187 | 4.75 | 0.030 | 0.56 | 0.012 | 0.30 | 4 |
1/2” | 0.500 | 12.7 | .250 | 6.35 | 0.030 | 0.56 | 0.012 | 0.30 | 4 |
3/4” | 0.752 | 19.1 | .375 | 9.53 | 0.035 | 0.69 | 0.012 | 0.30 | 4 |
1” | 1.00 | 25.4 | .50 | 12.70 | 0.040 | 0.76 | 0.012 | 0.30 | 4 |
1-1/2” | 1.50 | 38.1 | .75 | 19.10 | 0.043 | 0.86 | 0.012 | 0.30 | 4 |