NTE 2:1 Heat Shrink Tubing Assorted Packs

Perfect Kit for your Heat Shrinking Needs

NTE Heat Shrink kits, NTE-HS-ASST

Close Window

NTE 2:1 Heat Shrink Tubing Assorted Packs

    Additional Images
  • nte 2 to 1 black heat shrink tubing kit in closed case - icon
  • nte 2 to 1 red shrink tubing kit in closed case - icon
  • assorted color 2 to 1 shrink tubing kit in closed case - icon

This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player
Copyright ©2014 CableOrganizer.com

Low Price GuaranteeWhat's special about these Polyolefin shrink tubing kits?

  • Lower shrink temperature and higher use temperature than PVC for greater versatility
  • The ultra thin walls allow for use in confined or tight spaces
  • UL and CSA logosResistant to damage from common fluids and solvents
  • Click for More Features

NTE’s Thin Wall Heat Shrink 2:1 Tubing is a multi-use, high performance, commercial grade, flexible, flame retardant, polyolefin-based heat shrink tubing which provides you with superior protection from chemical, electrical, and physical damage. More

Found commonly in industrial and military applications when is needed cable and wire harnessing, strain relief, insulation, color coding, identification and protection from moisture or fluids.

  • 2:1 shrink ratio means the wrap shrinks to half of its original diameter
  • Shrink temperature of greater than 90°C and operating temperature of -55°C to 135°C
  • Comes in convenient kit size for easy transport and storage
  • Warrantied against defects
  • Meets the following standards:
    • UL 224, 125°C
    • CSA C22.2 No.198.1
    • MIL-DTL-23053/5 Class 2 & 3
  • Applications
    • Insulation
    • Identification of wiring
    • Bundling wire
    • Mechanical protection
    • Lightweight harnessing
    • Protect components
    • Strain relief
    • Solder insulation

 

Part # Diameter Length Color Box Dimensions Pieces Price
NTE-HS-ASST-2 1/16" (60 Pieces), 1/8" (40 Pieces),
3/16" (20 Pieces), 1/4" (18 Pieces),
3/8" (10 Pieces), 1/2" (10 Pieces)
2-1/2" Black 8.25" W x 3.25" L x 1.5" H 158
Qty:  
NTE-HS-ASST-3 1/16" (60 Pieces), 1/8" (40 Pieces),
3/16" (20 Pieces), 1/4" (18 Pieces),
3/8" (10 Pieces), 1/2" (10 Pieces)
2-1/2" Red 8.25" W x 3.25" L x 1.5" H 158
Qty:  
NTE-HS-ASST-9 1/16" (60 Pieces), 3/32" (35 Pieces),
1/8" (25 Pieces), 3/16" (20 Pieces),
1/4" (10 Pieces), 3/8" (10 Pieces)
4" Black, Red, Clear, Green, Blue, Yellow, White 8.25" W x 4.55" L x 1.5" H 160
Qty:  

 

PROPERTIES TEST METHOD TYPICAL VALUE
Physical
Tensile Strength ASTM D 638 13 N/mm2
Elongation at Break ASTM D 638 400%
Longitudinal Change ASTM D 2671 5%, −5% Maximum
Water Absorption ASTM D 570 0.15% Maximum
Specific Gravity ASTM D 792 1.4
Chemical
Fungus Resistance MIL−1−7444 Inert
Fluid Resistance MIL−1−23053/5 Good
Copper Corrosion ASTM D 2671 B Good
Thermal
Continuous Operating Temperature   −55° to 135°C
Minimum Shrink Temperature   > 90°C
Heat Shock (4 Hours at 250°C) ASTM D 2671 No Dripping, Cracking or Flowing
Heat Aging (168 Hours at 150°C) ASTM D 638 Elongation 300%
Low Temperature Flexibility (−55°C) ASTM D 2671 C No Cracking
Flammability UL 224 VW I Pass (Except Clear)
Electrical
Dielectric Strength ASTM D 2671 25kV/mm
Volume Resistivity ASTM D 257 10 @ 14 ohm.cm
PART # DIAMETER LENGTH COLOR QUANTITY WEIGHT PRICE
NTE-HS-ASST-2 1/16" (60 Pieces), 1/8" (40 Pieces),
3/16" (20 Pieces), 1/4" (18 Pieces),
3/8" (10 Pieces), 1/2" (10 Pieces)
2-1/2" Black 158 pieces 0.3 lb
Qty:  
NTE-HS-ASST-3 1/16" (60 Pieces), 1/8" (40 Pieces),
3/16" (20 Pieces), 1/4" (18 Pieces),
3/8" (10 Pieces), 1/2" (10 Pieces)
2-1/2" Red 158 pieces 0.3 lb
Qty:  
NTE-HS-ASST-9 1/16" (60 Pieces), 3/32" (35 Pieces),
1/8" (25 Pieces), 3/16" (20 Pieces),
1/4" (10 Pieces), 3/8" (10 Pieces)
4" Assorted 160 pieces 0.4 lb
Qty:  
Solder It 180Heat Guns, Hot Air Tools, Soldering
From
We offer a range of options to shrink your tubing, from small torches to ovens.

Heat Shrink2:1 Heat Shrink Tubing Kit
Price
2:1 Standard Wall
From / foot
2:1 Dual Wall
Call for pricing
It is designed for military and commercial, and for the consumer/OEM market requiring UL and/or Canadian Standards approval.

 
shrink tubing2:1 Neoprene Heat Shrink Tubing

2:1 Viton® Heat-shrinkable

2:1 Diesel Resistant Heat Shrink Tubing
These heat shrink tubings are formulated for special types of situations where standard protection would not be enough.

Conductive Heat Shrink TubingConductive Heat Shrink Connectors
From / foot
They are entirely coated on their inner surface providing shielding around the joints being connected.


What can make this page better?

We do everything we can think of to provide you with the product specs, images and ordering info you need, but if we’re missing something or still have room to improve, please let us know. Your comments, suggestions and questions are the best tools we have for serving you better!