Home > Heat Shrink > Heat Shrink Connectors > Heat Shrink End Caps
Heat Shrink End Caps
Don't Forget the Ends - Protect the Whole Cable
Close Window
Heat Shrink End Caps
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player End caps sold individually |
What's special about Heat Shrink End Caps?
|
Just like heat shrink tubing, heat shrink end caps are perfect for situations that call for extra protection against abrasion, moisture, chemicals and corrosion. They’re most commonly used to insulate and seal off wire and splice terminations in automotive, electrical and networking applications. End caps are typically used in conjunction with heat shrink tubing… they take over where the tubing leaves off!
Heat shrink tubing is capable of sealing the entire surface of a cable or wire, but can’t be closed off at the end should that be necessary. That’s where heat shrink end caps come into play: they’re shaped to fit over the ends of wires and cables. Our heat shrink end caps are adhesive lined, so that when one is fitted over the end of a wire, it forms a bond with the heat shrink tubing that it’s overlapping. The seal is completed when heat is applied: the adhesive melts and becomes fully activated, and the end cap material shrinks to a snug and exact fit around the cable’s end.
| Property | Test Method | Values |
| Operating Temperature Range | n/a | -55C to 110C |
|---|---|---|
| Shrink Temperature | n/a | 120C |
| Tensile Strength | ISO 37 | 14 Mpa minimum |
| Ultimate Elongation | ISO 37 | 400% minimum |
| Specific Gravity | ISO 1183 | 1.95 maximum |
| Electric Strength | IEC 243 | 15KV/mm minimum |
| Corrosion(Copper Contact and Copper Mirror) | ASTM D2671 | no corrosion |
| Water Absorption | ISO 62 | 0.5% maximum |
|
Fluid Resistance
|
ISO 1817 |
|
| Fungus Resistance | ISO 846 | no fungal growth |
| PART # | SIZE | ID BEFORE SHRINKING | ID AFTER SHRINKING | WALL AFTER SHRINKING | LENGTH BEFORE SHRINKING | PRICE / UNIT |
| HSEC0375 | 3/8" | 0.39 | 0.16 | 0.08 | 1.34 | |
| HSEC050 | 1/2" | 0.55 | 0.18 | 0.08 | 1.77 | |
| HSEC100 | 1" | 1.00 | 0.31 | 0.09 | 2.76 | |
| HSEC150 | 1-1/2" | 1.38 | 0.59 | 0.12 | 3.35 | |
| HSEC200 | 2" | 2.17 | 1.00 | 0.13 | 4.33 | |
| HSEC300 | 3" | 2.95 | 1.38 | 0.14 | 5.12 | |
| HSEC400 | 4" | 3.94 | 1.97 | 0.16 | 6.10 | |
| HSEC500 | 5" | 4.72 | 2.36 | 0.16 | 6.10 | |
| Click here for Technical Specifications | ||||||
Limiting Oxygen Index (LOI)
The ratio of how much oxygen - as compared to other gases - needs to be present in the air surrounding a particular material in order for that material to burn. The fact that Earth's normal atmospheric air contains around 21% oxygen is used a reference point when materials are classified into burn categories that are based on Limiting Oxygen Index. Substances that are combustible in air containing less than 21% oxygen are considered flammable, while those that burn in the range of anything greater than 21% but less than 28% are typically labeled "slow burning". Any material with an LOI that exceeds 28% is classified as self-extinguishing.
In the table below, you'll find a list of polymers commonly found in our heat shrink tubing and braided sleeving products, along with their LOIs and the burn categories each falls into.
| MATERIAL | ALTERNATE NAME | LOI | CATEGORY |
| ECTFE (Ethylene chlorotrifluoroethylene) | Halar | 64% | Self Extinguishing |
| Nomex | N/A | 28% | Slow Burning |
| Nylon 6:6 | N/A | Ranges fron 24-29% | Slow Burning to Self Extinguishing |
| PET (Polyethylene Terephthalate) | Mylar (film), Dacron (fiber) | Ranges from 21-34% | Slow Burning to Self Extinguishing |
| Polyethylene (PE) | N/A | 17% | Flammable |
| Polypropylene (PP) | polythene (in the UK) | 17% | Flammable |
| Polytetrafluoroethylene (PTFE) | Teflon | 95% | Self Extinguishing |
| Polyvinyl Chloride (PVC) | N/A | Ranges from 45-49% | Self Extinguishing |
ARTICLES - A place to find educational articles covering a wide range of topics, all categorized according to your areas of interest.Learn more
HOW-TO CORNER -
- How to use Heat Shrink Tubing
- Terminate the ends of your Braided Sleeving with Heat Shrink
- How do we measure Heat Shrink?
 2:1 Heat Shrink Tubing KitPrice $10.99 2:1 Standard Wall From $0.50 per foot 2:1 Dual Wall Call for pricing Cheap 2:1 Heat Shrink From $11.00 for 50ft spool of 3/64" |
 3:1 Standard WallFrom $0.53 per foot 3:1 Adhesive From $1.17 per foot Cheap 3:1 Heat Shrink From $14.40 per spool |
 4:1 Standard WallFrom $2.75 per foot 4:1 Adhesive From $0.95 per foot Our 4:1 heat shrink tubing is used for jacket retrofitting or repair and electrical insulation of wire assemblies with oversize components or connectors. |
Standard 6:1 Heat Shrink |
2:1 Neoprene Heat Shrink Tubing 2:1 Diesel Resistant Heat Shrink Tubing |
 Heat Shrink UV ReactiveFrom $1.00 per foot It is available in a 2:1 shrink ratio and in Luminous, Neon Pink, Neon Yellow, Neon Green, Luminous Green, and Gold.
|
 Heat Shrink End CapsFrom $0.70 Secure the ends of the tubing with these caps available in black in all three sizes.
|
 Conductive Heat Shrink ConnectorsFrom $3.99 per foot They are entirely coated on their inner surface providing shielding around the joints being connected.
|
 Heat Shrink Tools/ Heat GunsFrom $29.99 We offer a range of options to shrink your tubing, from small torches to ovens. |
|
High Temperature (Fluoropolymer) Heat Shrink Tubing |
|
 Fluorinated Ethylene-Propylene (FEP) Heat Shrink TubingFrom $2.34 per foot FEP is used in cases where temperatures are not as extreme, and very high shrink ratios are not necessary.
|
 Polytetrafluoroethylene (PTFE)
Heat Shrink TubingFrom $4.86 per foot PTFE is widely used in military applications because of its high continuous use temperature and outstanding chemical resistance.
|
 Polyvinylidene Fluoride (PVDF, Kynar®) Heat Shrink TubingFrom $5.49 per 4 FT PVDF is used in applications where continuous operating temperatures are 150-175°C. It is used where outstanding abrasion and cut-through resistance are required.
|
PTFE/FEP Dual Wall Heat Shrink Tubing From $2.97 per FT Constructed with an outer layer of heat shrinkable PTFE and an inner layer of FEP, it is easy to apply & is designed to provide a tight, moisture-proof bond.
|
Cheap 6:1 Heat Shrink