Home Heat Shrink Heat Shrink Connectors Heat Shrink Boots
Heat Shrink Breakout Boots
Protect and Seal your Multiple Breakout Points
Close Window
Heat Shrink Breakout Boots
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player |
Heat shrink transition boots are perfect for creating a waterproof seal on electrical connections. These end caps provide cable terminations with exceptional protection from water, moisture, air, and dirt. Available in multiple sizes to accommodate just about any application. |
- Provides complete coverage and protection when transitioning from single to multiple cables
- Temperature: -67º F to 230º F (- 55º C to 110º C)
- Heat-activated interior adhesive bonds to cabling when heated to provide a watertight seal
- Allows you to create secure cable outlets and breakout points
- Provides great strain relief and alleviates stress at cable splice points
- Can be used in conjunction with heat shrinkable tape, or silicone rubber splicing tape for additional protection
- Maximum Volt: 1000V
| Part # | Number of Cores (Breakouts) |
Boot (bigger) End | Breakout (smaller) End | Wall Thickness | Length | Max Voltage | Shrink Ratio | Price | |||
| Before Shrinking | After Shrinking | Before Shrinking | After Shrinking | Inlet | Outlet | ||||||
| ED-HSB-2-1 | 2 | 0.9" | 0.3 | 0.35" | 0.14" | 0.09 | 0.07 | 2.2" | 1000 | 3 to 1 | |
| ED-HSB-2-1.2 | 2 | 1.2" | 0.5 | 0.55" | 0.18" | 0.1 | 0.09 | 3.7" | 1000 | 3 to 1 | |
| ED-HSB-2-1.5 | 2 | 1.5" | 0.6 | 0.6" | 0.2" | 0.08 | 0.08 | 5" | 1000 | 3 to 1 | |
| ED-HSB-2-2.5 | 2 | 2.5" | 0.9 | 1" | 0.3" | 0.1 | 0.1 | 4.6" | 1000 | 3 to 1 | |
| ED-HSB-3-1.5 | 3 | 1.5" | 0.6 | 0.6" | 0.18" | 0.08 | 0.08 | 4.3" | 1000 | 3 to 1 | |
| ED-HSB-3-2.5 | 3 | 2.5" | 1 | 1" | 0.3" | 0.12 | 0.1 | 6.5" | 1000 | 3 to 1 | |
| ED-HSB-3-3 | 3 | 3" | 1.5 | 1.4" | 0.43" | 0.14 | 0.14 | 7" | 1000 | 3 to 1 | |
| ED-HSB-4-1.5 | 4 | 1.4" | 0.6 | 0.55" | 0.14" | 0.09 | 0.08 | 4.1" | 1000 | 3 to 1 | |
| ED-HSB-4-2 | 4 | 2" | 1.8 | 0.8" | 0.2" | 0.122 | 0.1 | 6" | 1000 | 3 to 1 | |
| ED-HSB-4-2.5 | 4 | 2.5" | 1 | 1" | 0.28" | 0.13 | 0.11 | 7" | 1000 | 3 to 1 | |
| ED-HSB-4-3 | 4 | 3" | 1 | 1.1" | 0.28" | 0.13 | 0.11 | 7" | 1000 | 3 to 1 | |
| ED-HSB-5-1.5 | 5 | 1.5" | 0.75 | 0.5" | 0.16" | 0.1 | 0.08 | 4" | 1000 | 3 to 1 | Currently Backordered |
| Technical Specifications | Value | Standard |
| Operating Temp. | 67ºF to 230ºF (-55°C to +110°C) | IEC 216 |
| Tensile Strength | 13Mp (min.) | ASTM D 2671 |
| Tensile strength after thermal aging 248ºF/168 hrs (120°C/168hrs.) | 10Mp (min.) | ASTM D 2671 |
| Elongation at break | 300% (min.) | ASTM D 2671 |
| Elongation at break after thermal aging 248ºF/168hrs (120°C/168hrs.) | 250% (min.) | ASTM D 2671 |
| Dielectric strength | 15kV/mm (min.) | IEC 243 |
| Volume resistance | 13 10 Ω.cm (min.) | IEC 93 |
| Water absorption | 1% (max.) | IEC 62 |
| PART # | # OF CORES | BOOT SIZE | DIMENSIONS | COLOR | PRICE | |
| LENGTH | CORES SIZE | |||||
| ED-HSB-2-1 | 2 | 0.9" | 2.2" | 0.35" | Black | |
| ED-HSB-2-1.2 | 2 | 1.2" | 3.7" | 0.55" | Black | |
| ED-HSB-2-1.5 | 2 | 1.5" | 5" | 0.6" | Black | |
| ED-HSB-2-2.5 | 2 | 2.5" | 4.6" | 1" | Black | |
| ED-HSB-3-1.5 | 3 | 1.5" | 4.3" | 0.6" | Black | |
| ED-HSB-3-2.5 | 3 | 2.5" | 6.5" | 1" | Black | |
| ED-HSB-3-3 | 3 | 3" | 7" | 1.4" | Black | |
| ED-HSB-4-1.5 | 4 | 1.5" | 4.1" | 0.55" | Black | |
| ED-HSB-4-2 | 4 | 2" | 6" | 0.8" | Black | |
| ED-HSB-4-2.5 | 4 | 2.5" | 7" | 1" | Black | |
| ED-HSB-4-3 | 4 | 3" | 7" | 1.1" | Black | |
| ED-HSB-5-1.5 | 5 | 1.5" | 4" | 0.5" | Black | Currently Backordered |
RELATED ARTICLES -
- The Handyman's Guide to Improvisation: 7 New Ways to Use Heat Shrink Tubing
- Heat Shrink Tubing: How It Was Invented, and Why We Use It
HOW-TO CORNER -
- How to use Heat Shrink Tubing
- Terminate the ends of your Braided Sleeving with Heat Shrink
- How do we measure Heat Shrink?
|
|
|
|
6:1 High Ratio Heat Shrink Tubing
Heat Shrink End Caps
Gardner Bender Heat Shrink Butt Splice Kits
Heat Guns
Facebook Comments