Corded Crimp Tool GL-CCCX11

• Operates directly from 120 volt or 230 volt 50 Hz electrical outlets so there's never a need to charge batteries or worry about running out of power.
• Equipped with 15 foot (5 m) cord and can be used with extension cords if needed.
• 360° rotating head adjusts to any work position.
• Lightweight, plus ergonomic-angled handle for comfortable, low-stress use.
• Cycles in seconds with a two-speed hydraulic pump, maximizing productivity.
• Automatic retraction when crimping and cutting cycles are complete.
• Includes a high-impact molded carrying case.
• U.S. Patent #6,206,663 and Patent Pending

Battery-Powered Crimp Tool GL-ECCX11

• Nickel-metal hydride battery (Ni-MH) delivers up to 140 cycles per charge.
• 360° rotating head adjusts to your work position.
• Lightweight, plus ergonomic-angled handle for comfortable, low-stress use.
• Cycles in seconds with two-speed hydraulic pump, maximizing productivity.
• Automatic retraction when crimping and cutting cycles are complete.
• Uses all optional CCX blades and adapters
• Includes two batteries, a 120V one-hour charger, and a high-impact molded carrying case.
• U.S. Patent #6,206,663 and Patent Pending

Corded Crimp Tool GL-CCCX11

• Crimping Force: 12,000 lb. (53 kN)
• Height: 12-1/8" (308 mm)
• Length 14-3/4" (375 mm)
• Weight 10.5 lbs. (4.8 kg)
• Operating Voltage: Voltage 120 volts, 60 cycle AC

Battery-Powered Crimp Tool GL-ECCX11

• Crimping Force 12,000 lb. (53 kN)
• Length 14-3/4" (375 mm)
• Height 12-1/8" (308 mm)
• Weight 10.5 lbs. (4.8 kg)
• Battery 12 Volt, 2.2 Ah, Ni-MH
• Battery Charge Time 1 hour

Adapters and Blades

• Cutting
  • Copper and Aluminum Cable: 1-1/2" (40 mm)
  • ACSR: 954 kcmil (MCM) (Cardinal)
  • Standard Guy Strand: 5/8" (20 mm)
  • EHS Guy Strand: 1/2" (13 mm)
  • Ground Rod: 1/2" (13 mm)
  • Rebar (schedule 60): 1/2" (13 mm)
  • Threaded Rod: 1/4", 3/8", 1/2", 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
  • DIN Rail: 35 x 7.5, 32 x 15 x 9, 35 x 15
• Crimping
  • Copper Color-Coded Lugs and Splices: 600 kcmil (MCM)
  • Aluminum Color-Coded Lugs and Splices: 300 kcmil (MCM)
  • 5/8" Service Entrance Connectors: #10-1/0
  • 0.840 Service Entrance Connectors: 1/0-4/0
  • Aluminum Overhead “H” taps: #6-4/0
  • One Piece ACSR Tension Splices: #4-1/0
  • Two Piece ACSR Tension Splices: #2-4/0
• Punching
  • Round: 2.42" (61.5 mm) in 10 ga. mild steel