SITE-RITE® Aluminum and SITE-RITE II® Iron Hand Conduit Benders

For 30° Bend, Position Handle Straight Up and Down

using conduit bender with handle down

Close Window

Greenlee SITE-RITE Aluminum and Iron Hand Conduit Benders

    Additional Images
  • greenlee 840 site-rite hand conduit bender with handle icon
  • greenlee 841 site-rite hand conduit bender icon
  • greenlee 8840 site-rite 2 hand conduit bender icon
  • greenlee 8843 site-rite 2 conduit bender with power foot icon

This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player
Copyright ©2014 CableOrganizer.com

View Product Video

View 3D Image

Low Price GuaranteeWhat's special about these Hand Benders?

GSA approved
  • Features a patented sight indicator that makes it quick and easy to bend angles
  • A contoured, non-slip pedal provides extra leverage
  • Square hook design offers strength and stability
  • Cast-in markings help with saddle or back-to-back bends, stub-ups, and head up or head down bending
  • Click for More Features

Greenlee® Hand Conduit Benders are available in heat-treated aluminum or malleable iron. The EMT, Rigid, or IMC conduit benders are offered with or without the handle. Affordable hand operated conduit benders to complete most conduit bending projects. For extra-large projects, please visit our heavy-duty conduit bender and equipment offerings.

The SITE-RITE® Aluminum Bender features:

  • A patented, heat-treated design makes this bender significantly stronger than other hand benders on the market
  • Offset multipliers, which are cast into the bender

 

Part # Centerline Bend Radius Conduit Type Construction Marking Handle Length Weight Price
GL-840 4-3/16" (106.363mm) 1/2" EMT Aluminum 10, 22-1/2, 30, 45, 60 Deg. - 1.4 lbs
Qty:  
GL-841 5-1/8" (130.175mm) 3/4" EMT - 1/2" Rigid - 2.1 lbs
Qty:  
GL-842 6-1/2" (165.10mm) 1" EMT - 3/4" Rigid - 3.5 lbs
Qty:  
GL-843 11" (279.40mm) 1-1/4" EMT - 1" Rigid - 8.3 lbs
Qty:  
GL-840H 4-3/16" (106.363mm) 1/2" EMT 38" 5.5 lbs
Qty:  
GL-841H 5-1/8" (130.175mm) 3/4" EMT - 1/2" Rigid 38" 6.4 lbs
Qty:  
GL-842H 6-1/2" (165.10mm) 1" EMT - 3/4" Rigid 44" 11 lbs
Qty:  
GL-8840 4-3/16" (106.363mm) 1/2" EMT Iron 10, 22-1/2, 30, 45, 60 Deg. - 3.1 lbs
Qty:  
GL-8841 5-1/8" (130.175mm) 3/4" EMT - 1/2" Rigid - 4.3 lbs
Qty:  
GL-8842 6-1/2" (165.10mm) 1" EMT - 3/4" Rigid - 7.2 lbs
Qty:  
GL-8840H 4-3/16" (106.363mm) 1/2" EMT 38" 7 lbs
Qty:  
GL-8841H 5-1/8" (130.175mm) 3/4" EMT - 1/2" Rigid 38" 9 lbs
Qty:  
GL-8842H 6-1/2" (165.10mm) 1" EMT - 3/4" Rigid 44" 15 lbs
Qty:  

Unless other noted, handles are sold separately here.

PART # DESCRIPTION EMT size Rigid, IMC size Centerline Bending Radii Handle Length Shipping Weight Price each
SITE-RITE® Aluminum Hand Bender
GL-840 SITE-RITE® Aluminum Hand Bender for 1/2" EMT 1/2" (12.70mm) - 4-3/16" (106.363mm) - 1.4 lbs
Qty:  
GL-841 SITE-RITE® Aluminum Hand Bender for 3/4" EMT, 1/2" Rigid, IMC
View 3D Image
3/4" (19.05mm) 1/2" (12.70mm) 5-1/8" (130.175mm) - 2.1 lbs
Qty:  
GL-842 SITE-RITE® Aluminum Hand Bender for 1" EMT, 3/4" Rigid, IMC 1" (25.40mm) 3/4" (19.05mm) 6-1/2" (165.10mm) - 3.5 lbs
Qty:  
GL-843 SITE-RITE® Aluminum Hand Bender for 1-1/4" EMT, 1" Rigid, IMC 1-1/4" (31.75mm) 1" (25.40mm) 11" (279.40mm) - 8.3 lbs
Qty:  
 
SITE-RITE® Aluminum Hand Bender with Handle
GL-840H SITE-RITE® Aluminum Hand Bender & handle for 1/2" EMT 1/2" (12.70mm) - 4-3/16" (106.363mm) 38" (965.20mm) 5.5 lbs
Qty:  
GL-841H SITE-RITE® Aluminum Hand Bender & handle for 3/4" EMT, 1/2" Rigid 3/4" (19.05mm) 1/2" (12.70mm) 5-1/8" (130.175mm) 38" (965.20mm) 6.4 lbs
Qty:  
GL-842H SITE-RITE® Aluminum Hand Bender & handle for 1" EMT, 3/4" Rigid 1" (25.40mm) 3/4" (19.05mm) 6-1/2" (165.10mm) 44" (1.1176mm) 11 lbs
Qty:  
 
SITE-RITE II® Hand Bender
GL-8840 SITE-RITE II® Malleable Iron Hand Bender for 1/2" EMT 1/2" (12.70mm) - 4-3/16" (106.363mm) - 3.1 lbs
Qty:  
GL-8841 SITE-RITE II® Malleable Iron Hand Bender for 3/4" EMT, 1/2" Rigid, IMC 3/4" (19.05mm) 1/2" (12.70mm) 5-1/8" (130.175mm) - 4.3 lbs
Qty:  
GL-8842 SITE-RITE II® Malleable Iron Hand Bender for 1" EMT, 3/4" Rigid, IMC 1" (25.40mm) 3/4" (19.05mm) 6-1/2" (165.10mm) - 7.2 lbs
Qty:  
 
SITE-RITE II® Hand Bender with Handle
GL-8840H SITE-RITE II® Malleable Iron Hand Bender & handle for 1/2" EMT 1/2" (12.70mm) - 4-3/16" (106.363mm) 38" (965.20mm) 7 lbs
Qty:  
GL-8841H SITE-RITE II® Malleable Iron Hand Bender & handle for 3/4" EMT, 1/2" Rigid 3/4" (19.05mm) 1/2" (12.70mm) 5-1/8" (130.175mm) 38" (965.20mm) 9 lbs
Qty:  
GL-8842H SITE-RITE II® Malleable Iron Hand Bender & handle for 1" EMT, 3/4" Rigid 1" (25.40mm) 3/4" (19.05mm) 6-1/2" (165.10mm) 44" (1.1176mm) 15 lbs
Qty:  
 
Handle for Benders
PART # DESCRIPTION EMT size Rigid, IMC size Centerline Bending Radii Handle Length Shipping Weight PRICE
GL-84H1 Handle for 1/2" and 3/4" Hand Benders - - - 38" (965.20mm) 3.8 lbs
Qty:  
GL-846 Handle for 1" Hand Benders - - - 44" (1.1176mm) 6.3 lbs
Qty:  
GL-84H3 Handle for 1-1/4" Benders - - - 61" (1.54940mm) 6.5 lbs
Qty:  

» Hand Bender Installation Instruction Manual - English/Spanish/French pdf

 

Bending

benders with red stars

The Hand Benders have a little star (highlighted here in red) right on the casting that indicates back to back bending. It is located right under the handle screws.

 

Handle Up

  1. bending conduit - handle upMark the conduit
  2. Insert the conduit into the bender so that the arrow is aligned with the bending mark
  3. Place one foot on the bender as illustrated. Use heavy foot pressure on the bending shoe; maintain this pressure throughout the bend.
  4. Look down the line of sight as illustrated. Stop bending when the pin is in line with the appropriate angle mark.

 

Note: Over bend rigid conduit slightly to compensate for spring back.

 

Handle Down

  1. bending conduit - handle downMark the conduit
  2. Insert the conduit into the bender so that the arrow is aligned with the bending mark.
  3. Position the bender as shown, with your body as close to the bender as possible.
  4. With the handle angled to prevent slipping, apply constant pressure against the conduit throughout the bend.
  5. Bend until the edge of the conduit is in line with the degree scale as illustrated.

 

Note: Over bend rigid conduit slightly to compensate for spring back.

Bending Tips

  • Line up all bends in the same plane
  • Bend 1/2" and 3/4" EMT with the handle down.
  • Bend 1" and 1-1/4" conduit with the handle up.
  • When bending with the handle up, work at a stairwell or loading dock so that previously made bends hang over the edge.

 

Warranty:
It is the policy of Greenlee Textron to meet or exceed customer expectations. In support of this policy, Greenlee Textron has implemented a new Limited Warranty Service Policy:
"Goods manufactured by Greenlee Textron will be free from defects in workmanship and material for a period of one year from the date of user purchase, provided such goods are installed, operated, used and maintained in accordance with Greenlee's written instructions. Proof of Purchase will no longer be required for serial numbered tools if the tool was manufactured within eighteen months prior to the time service is required. All other tools without serial numbers will be free of defects in workmanship and material for twelve months from date of purchase, but will require Proof of Purchase."

 

VIEW OUR GLOSSARY

 

Steel Conduit

Flexible Steel Conduit
From
Galvanized Steel Conduit is suitable for concealed, exposed, or approved raceways.

EMT Conduit

EMT Conduit
From / 100ft
EMT conduit is unthreaded steel raceway made of galvanized steel.

 
Deluxe Bender555® Deluxe Bender
Price
555® Deluxe Series features unique electrical controls that reduce the in-rush current to the relays to minimize the contact arcing for longer life, heavy-duty urethane filled puncture-proof pneumatic tires and UL/ULC approved.
Cam Rack Conduit BenderCam Rack® Conduit Bender
Price
One bender to bend EMT, IMC and Rigid Conduit. Fast and easy set-up on the jobsite. True one shot 90° bends with CT models for quick accurate bends.
 
Electric PVC BenderElectric PVC Heater / Bender
From
Easy to use: preheat for 10 minutes, insert PVC, rotate until pliable, remove and form bend. Sturdy double wall metal with fiberglass insulation and reflective interior for fast, even heat. Full length door for easy PVC loading and removal.
pipe benderPipe Spring Bender - Rack-a-Tiers
From
This tool allows you to cold bend schedule 40 PVC pipe and conduit with no distortion to the integrity and inside diameter of the pipe. This means you save on installation and materials expenses. The Pipe Spring Bender is designed to be used over and over for years of service. Flexible and strong, the springs are inserted into the pipe to give support to the pipe walls during manual bending.
 

Rack-a-Tiers Hoppy BenderRack-a-Tiers Hoppy Bender
From
Hand pipe benders have remained virtually unchanged for over 50 years now.  The Hoppy Bender has revolutionized the process by taking the guesswork and the mathematics out of bending pipe. This tool allows both experienced and inexperienced installers to create precise offsets, angles, and bends

Polywater SPY wipesPolywater® SPY Cable Lubricant
From
Available in spray or wipe-on formulas, this water-based cable lubricant facilitates all types of cable-pulling jobs, and is non-toxic and environmentally-friendly.


What can make this page better?

We do everything we can think of to provide you with the product specs, images and ordering info you need, but if we’re missing something or still have room to improve, please let us know. Your comments, suggestions and questions are the best tools we have for serving you better!