Home > Heat Shrink > Heat Shrink Connectors > Gardner Bender Butt Splice Kits
Gardner Bender Heat Shrink Butt Splice Kits
Create A Waterproof Connection for your Copper Cables
Gardner Bender Heat Shrink Butt Splice Kits
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player
|
What's special about these heat shrinkable connectors?
Gardner Bender heat shrink butt splices are the perfect solution for insulating and protecting your copper wire splices. The secure waterproof, dustproof seal can be used for direct burial as well as above ground applications. |
Secure set screw splice allows for a solid splice with maximum conductivity and mechanical strain relief
- Easy to use design makes installation quick and easy
- Rated for use up to 600V max
- Seals permanently using a heat gun or torch
- Heat shrink is lined with an aggressive adhesive that adheres to most plastics, rubber, neoprene, metals, and polyethylene
- Tubing provides high impact abrasion and corrosion resistant protection
- Eliminates the need to use messy epoxies or electrical tape
- HST-1300 is ideally suited for UF cables:
- Minimum conductor size 14/2 with ground
- Maximum conductor size 8/3 with ground
| Continuous Operating Temperature | -67° F to 257° F [-55° C to 125° C] |
|---|---|
| Shrink Temperature | 250° F [120° C] |
| Shrink Ratio | 2.5 : 1 |
| Maximum Voltage Rating | up to 600V |
| PART # | DESCRIPTION | WIRE GAUGE | WEIGHT | PRICE |
| GB-HSB-28 | 1-Screw Splice Connector [1] 1-1/2" dia, 4" Heavy Wall Polyolefin Heat Shrink Tubing |
#8 to #2 Copper Wire | 0.14 lb | |
| GB-HST-WP | 1-Screw Splice Connector [1] 3/4" dia, 4" Heavy Wall Polyolefin Heat Shrink Tubing |
#14 to #8 Copper Wire | 0.08 lb | |
| GB-HST-1300 | 4-Screw Splice Connectors [1] 1-1/2" dia, 8" Heavy Wall Polyolefin Heat Shrink Tubing |
#14 to #8 AWG UF Copper Wire | 0.26 lb |
MANUALS & USER GUIDES -
RELATED ARTICLES -
- The Facts on American Wire Gauge (AWG)
- The Handyman's Guide to Improvisation: 7 New Ways to Use Heat Shrink Tubing
- Heat Shrink Tubing: How It Was Invented, and Why We Use It
- How to Use Heat Shrink Tubing
 Perma-Seal™ Step-Down Butt Splice ConnectorsFrom $78.41 Able to shrink 40% faster than standard heat shrink, these butt splices allow you to join 2 different gauge wires into one, and are able to stand up to harsh conditions. |
 Krimpa-Seal Heat Shrink Butt SplicesFrom $14.31 Translucent polyolefin material lets you visually check the quality of your connections before permanently shrinking on these adhesive-lined connectors. |
 Heat Shrink End CapsFrom $0.70 These adhesive-lined end caps seal off wire ends and splice terminations to insulate and protect against moisture, chemicals, abrasion and corrosion. |
 Heat Shrink Tools/ Heat GunsFrom $29.99 We offer a range of options to shrink your tubing, from small torches to ovens. |
