Home Test Equipment Fiber Optic Testers & Kits OneShot Single Mode Test Set



Fluke Networks Fiber OneShot™ PRO Optical Test Set

One-Button Test Capability Ensures Trouble-Free Operation

Fluke OneShot Test Set

More Images
Close Window

Fluke Networks Fiber OneShot™ Optical Test Set

    Additional Images
  • OneShot Kit - icon
  • OneShot Kit plus Power Meter - icon
  • Case - icon
  • - icon

This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player
Copyright ©2013 CableOrganizer.com

CSA

Low Price GuaranteeWhat's special about this fiber optic test set?

  • Tests for active fiber, distances to a break or the end of the fiber run, and finds dirty end-faces and reflective events
  • Analysis distance can range from zero to 9,999 feet for testing in an offices, hubs, drops, network terminals and more
  • Easy-to-use, uncomplicated tester provides results within just a few seconds, allowing you to complete your job faster
  • Click for More Features

The Fluke Fiber OneShot PRO Optical Tester makes essential single-mode fiber testing easier than most other testers on the market. With the single-button testing, you get easy to read test results within seconds. The built to last energy-absorbing holster is built tough, to withstand accidental drops and rugged environments.

  • Results are displayed in an easy to read numerical layout for fast, simple testing
  • Extra large backlit display is perfect for using in dark areas like data closets, but can also be seen in extreme sun
  • Battery can last through up to 5,000 tests on a single charge, and extends its own life through auto-shutdown technology
  • Runs on (2) AA batteries for easy field replacement
  • Self-calibrating, so there's no need for annual factory calibrations
  • Adjust between metric and feet per the operator's choice
  • No load/boot time with the tester's Instant-On feature
  • No dead zones, so it can locate fiber faults as close as 1 meter

 

Operating temperature with the battery 0º C to 50º C
Non-operating temperature -20º C to 60º C
Operating relative humidity (without condensation) 95% (10º C to 35º C)
75% (35º C to 40º C)
uncontrolled < 10º C
Vibration Random, 5 Hz to 500 Hz, MIL-PRF- 28800F CLASS 2
Shock 1 meter drop test
Safety CSA C22.2 No. 61010.1:04
EN 61010-1 2nd Edition 2001
EN60825-1,2:2006
Altitude 9842 ft [3000 m]
EMC EN 61326-1: 2004
Battery type 2 AA alkaline batteries (no battery charger)
Battery life 1500 tests
Laser safety Class 1 CDRH
Complies to EN 60825-2
Sampling spacing 12.5 cm to 1 m (1.25 ns to 10 ns)
Instrument reporting information Distance to the first reflective incident and/or end of fiber
Incident type detected Display
UPC or APC open BREAK OR END OF FIBER
Break BREAK OR END OF FIBER
Reflective incident BREAK OR END OF FIBER
Poor bulkhead 0 ft/m
Connection (Will not measure a splice loss, connector loss, bend loss, or fiber attenuation.)
LCD type Backlit black and white (segments)
Index of refraction range 1.45 to 1.5 (factory default is 1.468)
Auto Turn-Off Automatically turns off after 5 minutes if no keys are pressed.
Backlight turns off first.
Factory calibration interval None
Output wavelengths 1310 nm ± 25 nm
Emitter type Fabry-Perot laser diode connected to 9/125 μm fiber
Laser classification Class 1 CDRH Complies to EN 60825-2
Pulse widths 20 ns to 500 ns
Power into fiber under test > 10 mW-pk
Dynamic range >11 dB
Distance to first reflective open 1m
Photodiode 40 μm - 80 μm, PIN InGaAs
Maximum distance 6000 meters or 9999 feet
Distance accuracy (0 m to 3000 m or 0 ft to 9999 ft) ± 1 m for reflective incidents, ± 0.1% of length
± 3 m for non-reflective incidents,
± 0.1% of length
Testing speed < 6 seconds typical
Connector Removable/cleanable SC adapter, UPC polish
Fiber types tested 9/125 μm singlemode
Reflectance threshold -40 dB typical
APC open detection1 -65 dB reflectance typical and backscatter > 3 dB above the noise floor
Input connector SC with removable/cleanable adapter UPC polish
Detector type InGaAs PIN photodiode used in incident detection
Safety CSA C22.2 No. 61010.1.04
EN 61010-1:2001 {2nd Edition},
EN60825-1:2007 Class 1 Laser
EN 61326-1, EN61000-4-2,3 80 MHz to 2.7 GHz @ 3V/m.
Telephony Requirements: Class B Emissions
Conforms to relevant European Union directives
Conforms to relevant Australian standards
Listed by the Canadian Standards Association CSA C22.2 No. 61010.1.04
PART # DESCRIPTION PRICE
FL-FIBR-1-KITPRO Fiber OneShot PRO SC-Kit
Includes:Fiber OneShot PRO Optical Test Set, SC adapter, UPC-UPC 2-meter launch cord, holster, case, reference guide on CD, manual & batteries
Qty:  
 
Accessories
FL-FIBR-AC-UAPC 1-Meter UPC-APC Launch CRD
Qty:  

OLM2Fiber Optic Pro Optical Multi-Tester
From $2,833.69
Combining a power meter and a 3-wavelength laser source for fiber optics, these testers have ample data storage, and are perfect for field testing and transferring the test results to PC via USB interface.

IDEAL Fiber Inspection MicroscopeIDEAL Fiber Inspection Microscope
From $263.33
100x magnification for checks for impurities and flaws on multimode connectors. Optional thread-on 200x eyepiece for inspecting singlemode connectors.
 

FastCAM ConnectorsLeviton FastCAM Fiber Connectors and Installation Kits
From $22.59
Leviton's new FastCAM pre-polished connectors and installation kits provide precision mechanical termination of single ?mode or multimode fiber. No proprietary tools, epoxy, or time-consuming hand polishing are required.

5890 TesterGREENLEE 5890 Multimode & Singlemode Fiber Optic Test Set
From $2,180.35
These ruggedly designed kits stand up to frequent field tests of fiber cable length, frequency and integrity. Get loss measurements at 850/1300nm or 1310/1550nm.

Currency
Converter


Shop with Confidence