Fluke IntelliTone™ Pro Probe

Take the Guesswork Out of Cable Locating

Low Price Guarantee


What's special about these tone-and-probes?

  • Allows you to locate cables quickly and easily
  • Traces cables on an active network with complete accuracy to avoid any confusion
  • Can also be used to verify cable continuity, detect faults and shorts, or identify pairs all in one step
  • Click for More Features

Fluke Intellitone™ toners and probes allow you to effectively and efficiently trace and locate cables at patch panels and switches, or within bundles. This dual-technology tester is equipped for use in multiple environments, and saves time and money because you only need one tool to complete the job.


FL-MT-8200-63A IntelliTone™ 200 Probe Only IntelliTone™ 200 Probe, RJ11 & RJ45 patch cables, lanyard, owner CD & quick start guide, 9V battery 0.25 lb
FL-MT-8203-20 Test Leads with Bed of Nails - Set of two banana jack test leads w/ piercing pin "Bed of Nails" alligator clips with vinyl sleeves
FL-MT-8203-22 Test Leads with Alligator Clips - Set of two banana jack test leads with standard alligator clips with vinyl sleeves
  • Able to isolate cables in large bundles, regardless of the EMI/RFI emitted from surrounding cables
  • Individual pairs can be located with SmartTone technology, which changes the sound of the tone when it comes across a short
  • Greater versatility: can be used on various types of cable including:
    • Data
    • Voice
    • Audio
    • Video
  • Equipped with both analog and digital capabilities for an all in one solution


Pro 200 Copper cabling media, including:
  • 75 or 50 Ohm Coaxial cable
  • Two-conductor control, security, and generic cabling
  • 10 Base-T or 10/100 Base-T datacom networks
  • POTS telecom service and UTP cable
  • 10/100/1 Gb Ethernet link connectivity with NIC/hub indication
  • Identifies and diagnoses POTS with Line 2 POTS service and polarity
  • Verifies shielded twisted pair with the CableMap feature, which identifies common cable miswires
Operating temperature 32°F to 104°F (0°C to 40°C)
Storage temperature -4°F to +140°F (-20°C to 60°C)
Operating relative humidity (% RH without condensation) 95% (50°F to 95°F; 10°C to 35°C)
75% (95°F to 104°F; 35°C to 40°C)
Uncontrolled < 50°F (< 10°C)
Vibration Random, 2 g, 5 Hz-500 Hz
Shock 1 m drop test with and without module
Safety EN 61010-1 1st Edition Amendments 1, 2
Altitude 3000 m
EMC EN 61326-1
Battery type and life 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
Applications Copper cabling media, including: 75 or 50 Ohm Coaxial cable, Two-conductor control, security, and generic cabling; 10 Base-T or 10/100 Base-T datacom networks, and POTS telecom service and UTP cable. Shielded Twisted Pair supported in Cablemap function of the IntelliTone 200.
Dimensions 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)
Weight (w/ battery) 6.0 oz (170g)
Display LED
Control Thumbwheel switch
Toner interface Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling, F Connector for coaxial cabling, and Banana Jack Plugs (2) for two-conductor wiring
Toner frequency IntelliTone™ signal: encoded digital signal
Analog SmartTone signal: 500 - 1200Hz, 4 songs
Talk battery voltage 6V into 600W
Output power 5V p-p
Voltage protection 100V
Auto power down Turns off automatically after 2-1/2 hours of inactivity
Dimensions 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)
Weight (w/ battery) 4.7 oz (133g)
Display (8) LED indicators, Synch LED indicator
Audio IntelliTone: Microprocessor-controlled audio files
Analog: Detected toner signal
Control Thumbwheel switch, volume control wheel
Tone detection Detects IntelliTone™ digital signals for Locate, Isolate, and CableMap functions
Detects analog SmartTone signal (500-1200Hz) and other analog toners.
Toner interface Main Mod8 port for CableMap on all 4 pairs of UTP / STP cabling
Auto power down Turns off automatically after 1 hour of inactivity







cable fault finderTDR Cable Fault Finder
This TDR is a hand-held Digital Cable Length Meter / TDR Fault Locator designed to both measure the length of copper communication cables and distance to a fault. Advanced signal processing techniques enable it to identify opens and short circuits, and directly indicate the fault distance on an alpha-numeric LCD.

Professional Tone and Probe KitProfessional Tone and Probe Kit
Designed for the telecom professional, this kit is for use on single conductors, twisted pairs, coax cables and de-energized electrical wiring.


Fluke CableIQFluke CableIQ™ Qualification Tester
Do you need to determine whether your existing cabling setup supports your 1000 BASE-T (Gigabit) network? A qualification tester is all you need. Basically, if you're looking to differentiate between cabling problems and network problems, a qualification tester is all you need.

Fluke Digital MultimeterFluke Digital Multimeter
More accurate measurements of voltage and current. With unique features such as a built in thermometer, Auto ranging and manual ranging for increase flexibility, an analog bar graph for unstable signals, and a lifetime warranty.


wire markersWire Markers, Labels
Variety of ways to help you get those wires and cables identified.


Do you have any question about this product?
Let our experts and customers resolve all your doubts

Did you know that we can give you a quote for most of our products, including shipping?

You can also call us toll free 866.222.0030

What can make this page better?

We do everything we can think of to provide you with the product specs, images and ordering info you need, but if we're missing something or still have room to improve, please let us know. Your comments, suggestions and questions are the best tools we have for serving you better!