Premier True RMS Digital Multimeter

Never Need Another Multimeter

Low Price Guarantee


What's special about the Fluke Multimeter?

  • True RMS allows for more accurate measurements of voltage and current
  • 0.05% DC accuracy
  • Unique features such as built-in thermometer, auto and manual ranging for increased flexibility, and analog bar graph for unstable signals
  • Measures up to 1000VAC and 1000 VDC
  • Fluke Lifetime warranty
  • Click for More Features

The Fluke Corporation 87V Industrial Multimeter is the premier True RMS digital multimeter on the market. True RMS allows for more accurate measurements of voltage and current. With unique features such as a built in thermometer, Auto ranging and manual ranging for increase flexibility, an analog bar graph for unstable signals, and a lifetime warranty, you should never need another multimeter.


Please Note: These products ship within 8 weeks

DFL-87V Fluke 87V True RMS Multimeter
DFL-87V-E Fluke 87V Electrician’s Kit

Fluke 87V Multimeter Includes:

  • Fluke 80 Series V Digital MultimetersFluke TL75 Test Leads
  • Fluke aC72 Alligator clips
  • Pre-installed 9V battery
  • Holster
  • Owner's Manual and detailed CD-Rom
  • Fluke 80BK Temperature Probe

Fluke 87V/E includes:

  • Fluke 87V Multimeter
  • TL224 silicone test leads
  • AC220 long reach alligator clips
  • TP238 test probes
  • Magnet & strap
  • 80BK temperature probe
  • Holster
  • 9V battery (installed)
  • Owner’s Manual and detailed CD-Rom


compliance logos

Voltage DC
Maximum Voltage 1000V
Accuracy Fluke 83 V: ± (0.1% + 1)
Fluke 87 V: ± (0.05% + 1)
Maximum Resolution Fluke 83 V: 100 µV
Fluke 87 V: 10 µV
Voltage DC
Maximum Voltage 1000V
Accuracy Fluke 83 V: ± (0.5% + 2)
Fluke 87 V: ± (0.7% + 2) True RMS
AC Bandwidth Fluke 83 V: 5kHz
Fluke 87 V: 20kHz*
*with low pass filter; 3db @ 1kHz
Maximum Resolution 01 mV
Current DC
Maximum Amps 10A (20A for 30 seconds maximum)
Amps Accuracy Fluke 83 V: ± (0.4% + 2)
Fluke 87 V: ± (0.2% + 2)
Maximum Resolution Fluke 83 V: 0.01 mA
Fluke 87 V: 0.01 µA
Current AC
Maximum Amps 10A (20A for 30 seconds maximum)
Amps Accuracy Fluke 83 V: ± (1.2% + 2)
Fluke 87 V: ± (1.0% + 2) True RMS
Maximum Resolution 0.1 µA
Maximum Resistance 50 MΩ
Accuracy Fluke 83 V: ± (0.4% + 1)
Fluke 87 V: ± (0.2% + 1)
Maximum Resolution 0.1Ω
Maximum Capacitance 9,999 µF
Accuracy ± (1% + 2)
Maximum Resolution 0.01 nF
Maximum Frequency 200 kHz
Accuracy ± (0.005% + 1)
Maximum Resolution 0.01 Hz
Duty Cycle
Maximum Duty Cycle 99.9%
Accuracy ± (0.2% per khz + 0.1%)
Maximum Resolution 0.1%
Range Accuracy Within ± (0.2% per kHz + 0.1 %)
Temperature Measurement -328.0° F - 1994.0° F (-200.0° C - 1090° C)
excluding probe
80 BK Temperature Probe -40.0° F - 500° F (-40.0° C - 260° C)
2.2°C or 2% whichever is greater
Maximum Conductance 60.00 nS
Accuracy ± (1.0% + 10)
Maximum Resolution 0.01 nS
Range Range 3 V
Resolution 1 mV
Accuracy ± (2 % + 1)


Operating Temperature -20° to +55° C
Storage Temperature -40° to +60° C
Humidity (w/out Condensation) 0% - 90% (0°C - 35°C)
0% - 70% (35°C - 55°C)
Operating Altitude 2000m
Over-voltage Category EN 61010-1 to 1000 V CAT III, 600V CAT IV
Agency Approvals UL, CSA, TÜV, VDE listed
Mechanical & General
Size 201 x 98 x 52 mm (with holster)
Weight 355 g
Weight w/ Holster & Flex-Stand 624 g
Display Digital: 6000 counts updates 4/sec. (Model 87 also has 19,999 counts in high-resolution mode.)
Analog: 32 segments, updates 40/sec.
Frequency: 19,999 counts, updates 3/sec at > 10 Hz.
Warranty Lifetime
Battery Life
~400 hours typical, without backlight
Shock 1 Meter drop per IEC 61010-1:2001
Vibration Per MIL-PRF-28800 for a Class 2 instrument






Fluke DXT CableAnalyzerFluke DTX CableAnalyzer™
They significantly reduce the time it takes to certify your network when compared with competitors’ analyzers. The Fluke DTX testers will test and certify your CAT 6 cable in 12 seconds. Most other testers take over 30 seconds to perform the same test. This translates to 85 extra certifications before lunch!

Fluke CableIQFluke CableIQ™ Qualification Tester
Do you need to determine whether your existing cabling setup supports your 1000 BASE-T (Gigabit) network? A qualification tester is all you need. Basically, if you're looking to differentiate between cabling problems and network problems, a qualification tester is all you need.


cable fault findersFluke TS® Cable Fault Finders
Designed to quickly locate cable faults or just measure the length of a cable run, these testing units are perfect for the fast, easy analysis and troubleshooting of Cat and coax cable.

Klein MM200 digital multimeterKlein MM200 Auto-Ranging Digital Multimeter
Ideal for applications ranging from hobbies to professional electrical work, this auto-ranging multimeter provides across-the-board electrical measurements, and features a backlit screen for easy readouts.

Do you have any question about this product?
Let our experts and customers resolve all your doubts

Did you know that we can give you a quote for most of our products, including shipping?

You can also call us toll free 866.222.0030


by PowerReviews
Fluke 87V Digital Multimeter

(based on 1 review)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 1 customer

Displaying review 1

Back to top


The DMM to have!

By rfrakes331k

from Galesburg, IL

About Me High bandwidth user

Verified Reviewer


  • Compact
  • Easy To Set Up


    Best Uses

      Comments about Fluke 87V Digital Multimeter:

      I use the product to test components in circuit.
      Easy to read Digital Display
      Overload protected so you can't fry it.
      Don't have any dislikes

      • Primary use:
      • Personal

      Displaying review 1

      Back to top

      What can make this page better?

      We do everything we can think of to provide you with the product specs, images and ordering info you need, but if we're missing something or still have room to improve, please let us know. Your comments, suggestions and questions are the best tools we have for serving you better!