Fire Protection Fire Stop Devices
A fire-rated wall or floor won't do much good if there isn't some type of protection at the entry and exit points of any cables or devices that run through them. And there's more to making your installation fire resistant than sealant, caulk and foam. There are plugs, grommets, collars, cableways/pathways, lighting covers, cable transit sleeves, wraps, and more, all designed as "Fire Stop" devices to
prevent the spread of flames between rooms or levels of buildings.
STI Intumescent Firestop RTC Collar
Designed to clamp securely around plastic pipes that penetrate through walls and floors, these intumescent collars expand upon exposure to fire to seal out smoke and flame.
STI Ready® Firestop Grommet
Perfect for firestopping single-cable penetrations without messy caulks and foams, these plenum-rated intumescent grommets simply snap around the cable, and then plug into the hole in your wall.
STI Series FP Intumescent Firestop Plugs
Ideal for sealing cable penetrations, conduit and blank openings against the spread of fire and smoke. Expand to 10 times their original size when exposed to high heat and flame.
Tenmat Fire Rated Lighting Covers
Designed to prevent ceiling fires from high-hat recessed lighting, these cup-shaped covers fit around can fixtures, and intumesce to seal out smoke and flame in the event of a fire.
STI Firestop E-Z Path Fire Rated Cableway
Thanks to its built-in firestopping system, this pathway remains code-compliant without additional sealants, no matter how many or how few cables you run through it.
Abesco CT 120 Cable Transit
The Cable Transit firestop is suitable for common types of construction including concrete floors and walls, gypsum drywall assemblies, and rated wooden floor constructions.
STI Split Firestop Sleeve Kits
Designed with a split pathway and come with wall plates. Weigh half of what competing threaded products do, and have fewer parts.
Tenmat Tool-less Fire Protection Troffer Covers
Designed to maintain the integrity of fire-rated ceilings in multi-story buildings. Fit easily about ceiling-mounted light fixtures to provide up to 1 hour of smoke and flame blockage in the event of a fire.
STI Intumescent SSC Collar
Shown to withstand humidity, temperature and immersion tests without significant loss of protective properties. Expand to seal through-wall pipe penetrations against flame and smoke.
Abesco Z240 Pipe Collars
Ideal for hotels, residence halls, office buildings, retail centers and other multi-compartment buildings, these fire collars seal off fire-melted plastic pipes to prevent flame spread between rooms or levels.
3M Fire Barrier 615 Plus Duct Wrap
Provides up to 2 hours protection from the spread of flames and smoke. The perfect shield for commercial kitchen grease ducts or an office building's ventilation and air duct system. Asbestos-Free.
STI Intumescent Wrap Strip
Designed to block the spread of flame and smoke through pipe passages in walls, floors and ceilings. Fits snugly around any size pipe, and rapidly expands to 24 times its original size.
What can make this page better?
We do everything we can think of to provide you with the product specs, images and ordering info you need, but if we’re missing something or still have room to improve, please let us know. Your comments, suggestions and questions are the best tools we have for serving you better!