Home Braided Sleeving Fiberglass Protective Sleevings Silicone Rubber Extruded Fiberglass Sleeving
Silicone Rubber Extruded Fiberglass Sleeving
Close Window
Silicone Rubber Extruded Fiberglass Sleeving
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player
|
High Voltage Silicone Rubber Extruded Fiberglass Sleeving has many uses and is recommended for the insulation of leads and connections in electrical and electronic components (transformers, coils, relays, solenoids etc.) where temperature extremes from -70°C through 200°C are encountered. It's made with a combination of silicone and rubber extruded onto a braided fiberglass sleeving. |
Exceeds the requirements of UL Subject 224 for 200°C, 600-volt operationThe silicone rubber coated sleeving is the only flexible insulating material appropriate for continuous service in ambient temperatures from -70°C through +200°C.
- NEMA: TF-1, Type 5 Thermal: Thermal Class 200°C
- Rated Class H by IEEE standards
- Acceptable for continuous service from -70°C through 200°C. Operation at temperatures up to 315°C is tolerated for short durations
- Exceeds the requirements of UL Subject 224 for 200°C, 600-volt operation
- Exceeds the requirements of MIL-I-3190/6, MIL-P-18057 (grade A), and ASTM D372
- Environmental:
- Resistant to moisture, corona, ozone, radiation, compression set, fungus, most chemicals and solvents, weathering, flexure fatigue and heat degradation.
- Flammability:
- Slow-burn.
- The coating maintains its electrical integrity even under severe fire conditions by forming a non-conductive ash.
- Colors:
- Available in white, black, and iron oxide red.
- Compliant with the European Union's Restrictions on the use of Hazardous Substances (RoHS) Directive
| Part # | Dielectric Grade | Min. Ave. Breakdown | Min. Indiv |
| SPSILA | A | 7000 | 6000 |
| SPSILC | C-1 | 2500 | 1500 |
Please Note: These products ship within 4 weeks
| AWG Size | Min. Diameter (in) | Max. Diameter (in) |
Spool Size (ft) | "A" Grade | "C-1" Grade | ||
| Color: Black, White, Iron Oxide Red | Color: Black, White, Iron Oxide Red | ||||||
| Part # | Price / Spool | Part # | Price / Spool | ||||
| 20 | 0.034 | 0.039 | 500' | SPSILA-020G | SPSILC-020G | ||
| 19 | 0.038 | 0.047 | 500' | SPSILA-019G | SPSILC-019G | ||
| 18 | 0.042 | 0.049 | 500' | SPSILA-018G | SPSILC-018G | ||
| 17 | 0.047 | 0.054 | 500' | SPSILA-017G | SPSILC-017G | ||
| 16 | 0.053 | 0.061 | 500' | SPSILA-016G | SPSILC-016G | ||
| 15 | 0.059 | 0.066 | 500' | SPSILA-015G | SPSILC-015G | ||
| 14 | 0.066 | 0.072 | 500' | SPSILA-014G | SPSILC-014G | ||
| 13 | 0.076 | 0.080 | 250' | SPSILA-013G | SPSILC-013G | ||
| 12 | 0.085 | 0.089 | 250' | SPSILA-012G | SPSILC-012G | ||
| 11 | 0.095 | 0.101 | 250' | SPSILA-011G | SPSILC-011G | ||
| 10 | 0.106 | 0.112 | 250' | SPSILA-010G | SPSILC-010G | ||
| 9 | 0.118 | 0.124 | 250' | SPSILA-009G | SPSILC-009G | ||
| 8 | 0.133 | 0.141 | 250' | SPSILA-008G | SPSILC-008G | ||
| 7 | 0.148 | 0.158 | 250' | SPSILA-007G | SPSILC-007G | ||
| 6 | 0.166 | 0.178 | 250' | SPSILA-006G | SPSILC-006G | ||
| 5 | 0.186 | 0.198 | 250' | SPSILA-005G | SPSILC-005G | ||
| 4 | 0.208 | 0.224 | 250' | SPSILA-004G | SPSILC-004G | ||
| 3 | 0.234 | 0.249 | 250' | SPSILA-003G | SPSILC-003G | ||
| 2 | 0.263 | 0.278 | 250' | SPSILA-002G | SPSILC-002G | ||
| 1 | 0.294 | 0.311 | 100' | SPSILA-001G | SPSILC-001G | ||
| 0 | 0.330 | 0.347 | 100' | SPSILA-000G | SPSILC-000G | ||
| 3/8" | 0.387 | 0.399 | 100' | SPSILA-0375 | SPSILC-0375 | ||
| 7/16" | 0.450 | 0.462 | 100' | SPSILA-0438 | SPSILC-0438 | ||
| 1/2" | 0.512 | 0.524 | 100' | SPSILA-050 | SPSILC-050 | ||
| 5/8" | 0.640 | 0.655 | 100' | SPSILA-0625 | SPSILC-0625 | ||
| 3/4" | 0.786 | 0.786 | 100' | SPSILA-075 | SPSILC-075 | ||
HOW-TO CORNER -
- How to Determine Which Product Diameter You Need
- How to Wire a Keystone Jack
- How to Tame Cables with Wire Loom
|
|
|
|
High Voltage Silicone Rubber Extruded Fiberglass Sleeving
Fiberglass Expandable Sleeving
Vinyl Coated Fiberglass Sleeving
Facebook Comments