Conduit Accessories

Kwikpath™ Accessories
From $17.44
Reduce the need for pulling long runs of raceway around awkward twists, turns and tight spaces. Branch raceway into different directions without removing existing cabling. Easy to handle and install.

Carlon Resi-Gard Raceway Accessories and Mounting Brackets
From $0.64
Carlon's accessories and mounting brackets allow you to have flexibility and versatility when doing low voltage wire installations. Each accessory is specially designed to make low voltage installations faster and easier.

Caddy® EMT and Rigid Conduit Clamps with Bolts
From $37.06 / 100 per pack
Ideal for mounting rigid conduit from ˝" to 4" in diameter to walls, studs and ceilings, these clamps are available in galvanized or stainless steel, can be installed vertically or horizontally, and require only a screwdriver for installation.

MaxCell Fabric Innerduct 3" 3 Cell
From $1,485.00 for 500'
The MaxCell textile innerduct is available in Standard, Plenum, Riser and Detectable versions. This innerduct is an innovative solution for the large-scale and often complicated issues that engineers, contractors, and network providers are often faced with.

MaxCell Inflatable Termination Bags for Conduit
From $26.25
This inflatable bag creates a watertight seal on conduit ends, and protects cables by keeping liquid, mud, debris, and small animals out.

Rack-a-Tiers LB Fitting Wire Guide
From $20.02
Threads wire through an LB fitting made from PVC or metal. LB fittings are right angle connectors that are used with conduit to bring cable through the wall of a house.

Greenlee 8600 Conduit Cutter
From $41.66
Cuts cleanly, no need to debur the inside of conduit. Easy operation - tighten screw, turn tool around the conduit, and snap the conduit in two.Conduit can be cut with wire installed without damaging wire.

Cantex® PVC Schedule 40 90° Elbows, 1/2" - 2"
From $0.64
These pre-formed 90° elbows allow conduit maneuver around corners and construction obstacles without you needing to use a PVC hot box to make bends.

Gardner Bender BX and Armored Cable Cutter
Price $52.39
Perfect for use with BX, MC, and AC armored cables, as well as 3/8" conduit, this cutter features adjustable cutting depth to prevent damage to internal conductors.

Chromalox Thermwire® Wrap
From $279.00
Designed to prevent plastic and metal pipes from freezing in low temperatures, this electric thermal wrap self-regulates to keep pipes at just the right temperature during heat fluctuations.

American Polywater® BonDuit® Conduit Adhesive
From $86.18
Formulated for PE, PVC, metallic and composite conduit, this adhesive creates an airtight, watertight bond between segments, so that interior cables stay safe from moisture, corrosion and interference in the most extreme conditions.

IPEX EPR Conduit Repair Kits
From $60.06
These Conduit Repair Kits save you time and money by allowing you to fix the problem without resorting to installing a new conduit system. Available in a variety of sizes to suit your application.

American Polywater® FST™ Foam Duct Sealant
From $58.91
Engineered to keep liquids, gases, debris and rodents out of conduit, this closed-cell foam sealant applies easily with a caulk gun, is able to expand and cure in the presence of water, and protects cables from the most hostile environments.

American Polywater® IceFree™ Antifreeze Gel System
From $235.82
Designed to prevent water from seeping into conduit and freezing, this antifreeze gel protects cables against corrosion and ice-related microbends for several years, so that they're able to transmit data without signal loss.

Ipex® Vertical Lok™ Electrical Duct Spacers
From $89.78 / 200 pieces
Designed for poured concrete applications, these duct spacers support conduit and hold it perfectly in place so that it remains correctly configured under the pressure of concrete pours.