Great Lakes Wall Mount Enclosures - WM Series

This Versatile, Strong, and Economical Cabinet is our Best Seller

Low Price Guarantee

QGL-WM-2418WM   

What's special about it?

  • Strong cold rolled 14 gauge steel – fully welded for durability
  • Left or right swing door for versatility
  • Independently locking front and rear doors for added security
  • (Optional) Shelves, mounting rails, cable management & power outlet strips pre-installed wherever you specify at no additional cost
  • Knockouts designed for 1", 2", and 3" conduit at top, bottom and rear sections
  • Comes with tap screws (no cage nuts necessary)
  • GSA approvedScratch and rust resistant powder coating - 3 layer finish
  • UL listed and made in the USA USA
  • Click for More Features
UL Listed

 

Images

Videos

All accessories installed into enclosures before shipping at no additional cost upon request

PART # U / RMS DESCRIPTION DIMENSIONS LOAD CAPACITY COLOR PRICE
QGL-WM-2418WM 12U Wall Mount/Swing Out Enclosure 24"H x 21.25"W x 18 "D 150 lbs. Black
Qty:  
QGL-WM-24WM 12U Wall Mount/Swing Out Enclosure 24"H x 21.25"W x 24.5"D 150 lbs. Black
Qty:  
QGL-WM-36WM 19U Wall Mount/Swing Out Enclosure 36"H x 21.25"W x 24.5"D 250 lbs. Black
Qty:  
QGL-WM-48WM 25U Wall Mount/Swing Out Enclosure 48"H x 21.25"W x 24.5"D 300 lbs. Black
Qty:  

 

Accessories

PART# DESCRIPTION COLOR PRICE
QGL-7217WS * Fan Assembly w/ fan guards and two 75 CFM fans Black
Qty:  
QGL-7206-14 Stationary Shelf - 17.5"W x 14"D for 19" Mounting - 80 lbs weight capacity
Shelf compatible only with WM-2418WM because of the depth of the cabinet
Black
Qty:  
QGL-7206-FM Stationary Front Mount Shelf - 17.25"W x 18"D for 19" Mounting - 60 lbs weight capacity Black
Qty:  
QGL-7206-EIA Stationary Shelf - 17.468"W x 18"D for 19" Mounting - 80 lbs weight capacity Black
Qty:  
QGL-7206-SL Sliding Shelf - 16.343"W x 17.5"D for 19" Mounting - 40 lbs weight capacity ** Black
Qty:  
QGL-7219 6 Position Power Strip w/ Circuit Breaker, 5-15P plug for 19" Mounting *** Black
Qty:  
QGL-7219-SR14 6 Position Power Strip w/ Circuit Breaker, Surge Suppressor, 5-15P plug for 19" Mounting *** Black
Qty:  
QGL-CBB-19 19" Rack Mounted Copper Bus Bar (Isolated) n/a
Qty:  

* 7217WS fan assemblies are UL approved if installed by GLCC during initial shipment
** 7206-SL sliding shelf uses 14" slides rated at 60 lbs
*** All power outlet strips supplied with circuit breakers and 15' cord. All components UL approved

  • Made of 14 Gauge cold rolled steel fully welded, front door (16 Ga)
  • UL listed per STD 508, Type 1
  • UL Listed: UL60950-1 Standard for IT & Communications Equipment, Cabinet Enclosures and Rack Systems
  • ISO 9001:2000 registered
  • Front and rear sections lock independently for added security.
  • Choose your front door style (solid or plexiglas)
  • Two pairs of 12-24 tapped 19" EIA rails (12 Gauge) are provided with each enclosure
  • Swing out center section
  • Sides of center section have vented slots at top and bottom
  • Front and rear cable access
  • Provisions for 2 low profile 75 cfm fans at top or bottom (optional)
  • Knockouts designed for 1", 2", and 3" conduit at top, bottom and rear sections
  • Identical top & bottom panels, allowing enclosure to be flipped
  • Reversible mounting to conserve space
  • Easy wiring, installation and maintenance
  • Stock color is black

 

Great Lakes Features:

  • 8 week shipping time on custom changes
  • Custom colors available upon request (Additional charge may apply. Please allow up to an additional 4 week ship time)
  • Custom configurations assembles in 24-48 hours
  • Accessories installed where you specify
  • No additional freight charges for installed options
    • Shelves placed where you specify
    • Mounting rails located where you specify
    • Cable Management installed where you specify
    • Power outlet strips installed where you specify
  • No additional cost for drop ship
  • All enclosures have a Serial Number

 

General

  • The Wall mount enclosure must be UL listed per STD 508, Type 1 and 24, 36, 48" H x 21.25" W x 24.50" D (24" H available in 18" D)
  • Unit must be 3 "piece" sectional design using a continuous hinge between. Front and rear sections latch with "push-pull" catch and each section must lock independently. Wall mount to be reversible allowing for right or left hand swing. Top and bottom set up to accept fan assembly. Black powder coat finish on 14-gauge steel.
  • Manufacturer must be ISO 9001:2000 registered
  • Mounting - The base unit must have 2 pair of 19" rack mount rails that are tapped 12-24. Adjustable front to rear.
  • Cable Access -Rear section to have knockouts in center back and top/bottom for conduit sizes 1, 2 & 3".
  • Doors -Doors to be plexiglass or solid. Base unit must have gasketing for the doors.
  • Sides -Sides of center section to have venting slots on top and bottom
  • Cable Management - all 19" rack mounted cable management to be installed, preferably on the rear rails.
  • Power Strips - all 19" rack mounted power strips to be installed on the rear rails.
  • Fans - 2 low profile 75cfm fans to be installed in cabinet (when ordered)

 

Great Lakes Wall Mount WM Series Diagram
side diagram Great Lakes WM Series Enclosure
back diagram Great Lakes WM Series Enclosure
top and bottom diagram Great Lakes WM Series Enclosure

 

PART # Overall Height
[A]
Rack Depth
[B]
Overall Depth
[C]
QGL-WM-2418WM 24.0" 11.25" 18.0"
QGL-WM-24WM 24.0" 18.00" 24.5"
QGL-WM-36WM 36.0" 18.00" 24.5"
QGL-WM-48WM 48.0" 18.00" 24.5"

 

Part # Overall
Dimensions
Rack
Space
Weight
Capacity
Shipping
Weight
Shipping
Dimensions
(H x W x D)
Color
QGL-WM-2418WM 24"H x 21.25"W x 18 "D 12U 150 lbs * 90 lbs 27" x 24" x 20.5" ** Black
QGL-WM-24WM 24"H x 21.25"W x 24.5"D 12U 150 lbs * 95 lbs 27" x 24" x 26" ** Black
QGL-WM-36WM 36"H x 21.25"W x 24.5"D 19U 250 lbs * 125 lbs 39" x 24" x 26" ** Black
QGL-WM-48WM 48"H x 21.25"W x 24.5"D 25U 300 lbs * 160 lbs 51" x 24" x 26" ** Black

  * Maximum weight capacities at minimal deflection
  ** Multiple units to same location will get skidded

HOW-TO CORNER -

 

ENCLOSURES

computer armoires, computer rack, computer enclosures, cabinet rack, rack server, cabinet network, server racks, cabinets security

 

RACKS

racks, computer rack, computer enclosures, cabinet rack, rack server, cabinet network, server racks

WALL MOUNT

Wall Mount Cabinets

ACCESSORIES

rackmount shelf, rackmount keyboard

 

Computer WorkbenchComputer WorkBench from Kendall Howard Power Distribution for Racks and CabinetsPower Distribution
Vertical & Horizontal Strips, Extension Cords, etc
APC Power Distribution Unit (PDU)
From

Do you have any question about this product?
Let our experts and customers resolve all your doubts

Did you know that we can give you a quote for most of our products, including shipping?


You can also call us toll free 866.222.0030

What can make this page better?

We do everything we can think of to provide you with the product specs, images and ordering info you need, but if we're missing something or still have room to improve, please let us know. Your comments, suggestions and questions are the best tools we have for serving you better!