Cleaners / Degreasers, Protective Coating

MG Chemicals Epoxy Encapsulating and Potting Compound
From $34.11
This epoxy comes in two colors, black and clear. The black epoxy will protect not only the PC board but your proprietary information as well. No one will be able to see your board under the black protective coating. The clear epoxy leaves your PC Board open to viewing but still protected from harmful moisture, impact, dirt, debris, chemicals and anything else that might damage your electrical components.

MG Chemicals High Temperature Epoxy Encapsulating and Potting Compound
From $44.16
Formulated to fully encapsulate circuit boards and other sensitive components, this epoxy compound provides permanent protection against moisture, chemicals, vibration, impact, and abrasion.

MGC-409 Electrosolve Contact Cleaner
From $7.79
MG Chemical’s MGC-409B Electrosolve Contact Cleaner is a powerful and effective cleaning tool that rapidly penetrates and dissolves many types of soil. This is the perfect cleaner when zero residue contact is required for clear connections. This product is flammable and so caution must be used.

MGC-422 and MGC-422A Silicone Conformal Spray
From Item not found
MG Chemical’s MGC-422 and MGC-422A Silicone Conformal Coating provides a clear tough protective coating designed to protect your circuit boards and electrical components. This product comes in handy pen size all the up to 4L drum size, to suite small to large applications.

MG Chemicals Safety Wash II Cleaner Degreaser
Price $16.02
MGC-4050A MG Chemicals Safety Wash II Cleaner Degreaser is a highly flammable, low toxicity wash which is an excellent choice if you need to remove oil, grease, dirt, smoke, solder flux from office and medical equipment, connectors, workbenches, relays, just about anything.

MG Chemicals Super Wash Cleaner / Degreaser
From $16.02
MGC-406B Super Wash Cleaner / Degreaser is an excellent choice for removing the residue from flux cleaner as well as the flux itself that may still be left behind on the printed circuit board. Super Wash is available in aerosol form and is dries very quickly, so your board is ready for use almost immediately after rinsing.

Silicone Heat Transfer Compound - MGC-860
From $17.03
MGC-860 MG Chemicals Silicone Heat Transfer Compound is highly conductive and will not harden when it dries. It is made for transferring heat away from all types of electrical and electronic devices. Excellent for use with heat sinks, transistors, semi-conductors and more.

MG Chemicals Thermally Conductive Epoxy Encapsulating & Potting Compound
From $44.17
Formulated to completely encapsulate sensitive components, this potting compound makes circuit boards resistant to impact, water, and chemicals, and helps to dissipate heat.

Grime-Away™ Multi-Purpose Cleaning Wipes
Price $17.17
With dual scrubbing textures and a unique combination of solvents, these cleaning wipes remove all types of dirt and grime while leaving your hands soft and moisturized.

Klein Kleaners® Waterless Hand Cleaning Towels
Price $18.28
These towels work on the toughest cleaning jobs: oils, tar, adhesives, asphalt, was, graphite, grease and many other difficult to remove soils. Self-dispensing, portable bucket features a re-sealable cap and contains 72 disposable towels.

MG Chemicals Projection Tube Coolant
From $6.98
MG Chemical’s MGC-803 Projection Tube Coolant is non-flammable, environmentally friendly and made for the expressed purpose of replacing heat transfer fluid in projection tubes. This coolant flows easily through the projection tubes and allows heat to easily dissipate. This non corrosive formula also won’t damage or cause corrosion on your projection tubes.

MGC-411 MG Chemicals HFE Solvent
Price $40.89
MG Chemical’s MGC-411 HFE Solvent is a non-flammable, non conductive, non-VOC, cleaner degreaser that is safe on plastics and works well with vapor degreaser and ultrasonics.

MGC-403A Super Cold 134A
From $10.89
MGC-403A Super Cold 134A Spray is made for finding thermal or “hot” intermittent faults on your electronic components, PCB cracks, and cold solder joints. In addition, the frigid air protects heat-sensitive components during soldering. As an added benefit, the spray will freeze gum, glues and adhesives so that you can remove it effortlessly.

NTE® Techspray® Label and Adhesive Remover Aerosol
Price $13.65
Perfect for home, office and even industrial environments, this spray-on, citrus-based solvent quickly breaks up labels and adhesives on most surfaces, so that they can be easily wiped away without residue.

NTE® Techspray® G3 Blue Shower Cleaner & Degreaser
Price $30.43
Ideal for use with engines, machinery and electrical equipment, this degreaser works fast to remove oils and contaminants from metal and most plastics with little to no scrubbing on your part.