Cable Tray Accessories, Mounting Supports & Hardware

CM99 Ratchet Tool
This tool is the only thing you will need for the installation of cable trays. NOTE: All CM10 series cable trays come with this tool.

Center Support Kit
1/4" threaded rod kit. Includes (1) center hung bracket, (1) 1/4 " coupling nut, (1) 1/2 ", (1) 1/4 " flat washer, (2) 1/4 " finned nuts and (1) 6" silicone protective tube.
3/8" threaded rod kit. Includes (1) center support bracket, (1) 3/8" coupling nut, (1) 1/2 ", (1) 3/8" flat washer, (2) 3/8" finned nuts and (1) 6" silicone protective tube.

Trapeze Support Kit
1/4" threaded rod kit. Includes (1) trapeze support bracket, (2) 1/4" coupling nuts, (4) 1/4 " flat washers and (4) 1/4" finned nuts.
3/8" threaded rod kit. Includes (1) trapeze support bracket, (2) 3/8" coupling nuts, (4) 3/8" flat washers and (4) 3/8" finned nuts.

Floor Support
Custom sizes and colors are available. Safety Yellow, White, Chrome and Black.
Widths: 02", 04", 06", 08", 12", 18", 24"
Height: 4"

Wall Mount Bracket
Custom sizes and colors are available. Safety Yellow, White, Chrome and Black. Widths: 02", 04", 06", 08", 12", 18", 24"

Support Brackets
- Provides support for cable trays without the use of a threaded rod
- Can be securely attached to walls or floors
- Available in “L” or “C” shape to allow further access to cables

Waterfall
Give a gentle drop for cables to a lower level or into an enclosure or hole

Cable Tray Cover
- Solid cover prevents build up of dust and particles on cabling
- Protects cables from being crushed by items that may fall into cable trays
- Available in 5 standard colors for color coding cable tray installations:
Yellow, Orange, White, Chrome, Black

Solid Bottom Plate
- Lightweight and easy to install
- Solid bottom provides a flat surface to make installing cables easier
- Works well with CM10, CM20, and ME2 Cable Trays
- Available in 5 standard colors for color coding cable tray installations:
Yellow, Orange, White, Chrome, Black

Elevation Changes
Allow you to route cables to a higher or lower location

CM58 Tray Extension
The extensions fit into side guides facilitating adjustment of the tray up to 6 inches on each end. It is not recommended that the cable tray be cut as it will interfere with the grounding characteristics and UL classification. To view installation and instructions, click here.

Universal Loop
Are use to make elevation adjustments for drop or straight sections. This universal loop act as a hinge. To view installation and instructions, click here.

Pedestal Angle & Bridge Support

• Angled and Bridge support provide sturdier support for raised floor cable tray installation
• Supports provide strong “backbone” to avoid cable tray installations from bending under the weight of cables
• Pedestal Angle Support Kit Includes:
  - (2) Angle Supports
  - (2) "U" clamps. Clamps fit up to a 1 ½” dis. Pedestal
• Raised Floor Pedestal Bridge Support Kit Includes:
• (1) Bridge Support. Spans 24 inch center to center floor pedestals up to 1 1/2" diameter
• (2)"U" clamp

Hang tray from 1 threaded rod secured from above. PROS: 1 rod for easier less expensive installation. CONS: Interrupting cable flow with a rod running in the middle of the tray. Rod and Beam clamp are not included , available at local hardware store.

Hang tray from 2 threaded rods secured from above. PROS:Rods installed from side, provide no obstacles for cable pulls. CONS:Extra cost for more threaded rods and time for installation. Rod and Beam clamp are not included , available at local hardware store.

Free standing supports for use under raised flooring applications. 4" high legs

Standard L type wall mount bracket, cable tray rests on top. Screws for wall mounting are not included due to the multiple different types of wall materials

Mounts to the vertical legs of a raised floor system. Provides flat surface for tray to sit on.

Includes:

A cable tray "hammock" - it spans between 2 raised flooring legs for the tray to rest on

Includes: