M.E.2 Straight Sections

 

Straight Sections

Low Price GuaranteeWhat's special about this cable tray?

    GSA approved
  • The M.E.2 cable management system is constructed with sturdy 0.187 diameter steel wire that has been welded into a 2" x 4" grid
  • Designed to be easily combined with factory-made junctions and may be sized at the installation site
  • The 7' or 10' length straight sections are easy to handle
  • 2" or 4" deep trays are available in 6", 8", 12", 18" and 24" widths
  • ETL listed
  • Click for More Features

Don't forget to pick up a CM99 Ratchet, the only tool needed to install cable trays.

 

Installation:
Tray sections can be cut to size with the use of an off-set blade bolt cutting tool. By cutting and removing wires, horizontal bends can be easily created. Elevation changes can be fabricated on site by cutting away all side wires from a grid and bending the tray as needed.

Grounding:
Cable trays are required to be grounded and bonded by NEC Article 250 for power, and data communication applications. A UL listed split bolt can be used as a bonding jumper to connect to each M.E.2 cable tray section when code requires it. If splice washer kits or connection loops are used to connect tray sections electrical ground path connectivity will be provided.

Tray Lengths:
7 and 10 ft lengths are available for purchase in a variety of widths: 6,8, 12, 18, and 24 inches. All of Cable-Mgrs. Cable Trays are measured in inches and not based on the metric system.

Material and Finish:
M.E.2 Cable Trays are 0.187 steel wire, welded into a 2" x 4" grid. The only available color is chrome.

Installation Hardware:
Mounting hardware is available for wall, trapeze, center support, and raised floor applications.

 

Please Note: These products ship in 5-7 days
NON-CANCELLABLE & NON-REFUNDABLE

Manufacturer recommends support every 5 feet

2" DEPTH
WIDTH PART# PRICE PER 7' PART# PRICE PER 10'
6" XME2-6-2-7FT
Qty:  
XME2-6-2-10FT
Qty:  
8" XME2-8-2-7FT
Qty:  
XME2-8-2-10FT
Qty:  
12" XME2-12-2-7FT
Qty:  
XME2-12-2-10FT
Qty:  
18" XME2-18-2-7FT
Qty:  
XME2-18-2-10FT
Qty:  
24" XME2-24-2-7FT
Qty:  
XME2-24-2-10FT
Qty:  
4" DEPTH
WIDTH PART# PRICE PER 7' PART# PRICE PER 10'
6" XME2-6-4-7FT
Qty:  
XME2-6-4-10FT
Qty:  
8" XME2-8-4-7FT
Qty:  
XME2-8-4-10FT
Qty:  
12" XME2-12-4-7FT
Qty:  
XME2-12-4-10FT
Qty:  
18" XME2-18-4-7FT
Qty:  
XME2-18-4-10FT
Qty:  
24" XME2-24-4-7FT
Qty:  
XME2-24-4-10FT
Qty:  
Pick up a Ratchet Tool below
Image Part # Description Price
Ratchet Tool XCM99-RATCHET CM99 Ratchet
Qty:  

 

JUNCTIONS & INSTALLATION ACCESSORIES
 
Mounting AccessoriesMounting Brackets & Accessories
Accessories, Ceiling and Wall mounts for cable trays.
ME2 Cable Tray JunctionsM.E.2 Cable Tray Junctions
Changing routing directions is made easy with pre-fabricated L-, T-, and X-type tray junctions.
ME2 AccessoriesM.E.2 Installation Accessories
Cable tray sections are joined together with ease using these kits.
ME2 Reducer Cable TraysM.E.2 Reducers
Reducer sections transition seamlessly from one width to another and easily connect to tray sections using splice washer clamps.

REVIEW SNAPSHOT®

by PowerReviews
ME2 Straight Section 6"W x 2"D x 7'L
 
3.5

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Sort by

Displaying reviews 1-2

Back to top

 
3.0

Not very refined, but good for the price

By scsc_tech

from Santa Cruz, CA

About Me Professional

Pros

  • Durable
  • Inexpensive

Cons

  • Difficult To Install
  • Odd Design

Best Uses

  • Hallways

Comments about ME2 Straight Section 6"W x 2"D x 7'L:

First off this is very durable and strong tray. The sections are well built and are nice and straight.
My first recommendation is DO NOT try to cut this and make 90 degree bends or T's. Buy the prebuilt T's and corners that they sell. You will save yourself a lot of headache and time.
Where you end up cutting the sections with bolt cutters, you will have sharp edges exposed that will need some quick filing or grinding. Doing elevation changes can be a bit frustrating at times if you have a lot of them.

(1 of 1 customers found this review helpful)

 
4.0

Cut your cable tray to fit!

By Matty

from Fort lauderdale

Staff Reviewer

Pros

  • Attractive Design
  • Customizable
  • Durable
  • Easy To Install
  • Easy To Use

Cons

    Best Uses

    • Office

    Comments about ME2 Straight Section 6"W x 2"D x 7'L:

    ME2 is great because you can cut it to fit your exact specs!

    Displaying reviews 1-2

    Back to top

    Cable Trays Straight Section CM10 Straight Section (0.120 in. Ø steel) - Fiber Optic Tray
    From

    CM20 straight cable trays CM20 Straight Section (.187Ø)
    Provides a great cabling solution for most data and power applications

     

    Enduro Cable Tray SystemEnduro EHL6 Series Fiberglass Cable Tray System
    From
    Non-metallic, non-conductive tray complies with ABS standards. Full radius, one piece molded fitting is lightweight, and has smooth sides so there is no cable snagging or damaging. Resists corrosion for long lasting durability: won't rust, peel or flake.

    cable roller kit, RM742Black Box BasketPAC Cable Roller Kit
    Price
    Designed to prevent pulling friction and damage and reduce installer fatigue, these cable rolling sheaves help heavy cable bundles glide smoothly through cable trays and around turns in long and complicated cable pulls.


    What can make this page better?

    We do everything we can think of to provide you with the product specs, images and ordering info you need, but if we’re missing something or still have room to improve, please let us know. Your comments, suggestions and questions are the best tools we have for serving you better!