Arlington® Roof Topper™ Rooftop Conduit Supports

Run Conduit Affordably on Your Rooftop

Low Price Guarantee

AI-RTS4   

What's special about these pipe supports?

  • Raises conduit (4” or larger) off of a roof’s surface, enabling the installation to meet NEC requirements
  • Supports up to 2000 lbs, well beyond what is commonly be needed for a reliable permanent installation
  • Requires no drilling into the roof; simply place the support on the roof’s deck and install conduit
  • Lightweight, UV-rated plastic bases stand up to many years rooftop sun exposure in any climate
  • Click for More Features

Roof Topper™ Conduit Supports from Arlington® provide an effective, economical, and ecologically sustainable solution for running pipelines atop your roof. Instead of heavy rubber blocks that can harden and crumble over time under the Sun's heat, these supports are made of lightweight, UV-rated recycled plastic. There are several configurations available to suit your application

Images

Roof Toppers | Strut Clamps

PART # DIMENSIONS WEIGHT QUANTITY PRICE
Standard Base with Strut Installed
AI-RTS4 9" W x 5-5/8" H
(22.86 X 14.28 cm)
28.9 lbs (13.1 kg) 1
Qty:  
AI-RTS421 21" W x 5-5/8" H
(53.34 x 14.28 cm)
31.55 lbs (0.59 kg) 1
Qty:  
Split Base with Strut Installed
AI-RTS402 9" W x 4-7/8" H
(22.86 x 12.38 cm)
28.9 lbs (13.1 kg) 1
Qty:  
Strut Attached with End Clamp
AI-RTSE405 5" W x 4" H
(12.7 x 10.16 cm)
13.1 lbs (5.9 kg) 1
Qty:  
AI-RTSE409 9" W x 4" H
(22.86 x 10.16 cm)
11.5 lbs (5.2 kg) 1
Qty:  
AI-RTSE1209 9" W x 12" H
(22.86 x 30.48 cm)
20.8 lbs (9.4 kg) 1
Qty:  
Strut and Threaded Rod Installed
AI-RTS12 9" W x 12" H
(22.86 x 30.48 cm)
19.25 lbs (8.7 kg) 1
Qty:  
AI-RTS1221 21" W x 12" H
(53.34 x 30.48 cm)
39.35 lbs (17.8 kg) 1
Qty:  
Base Only
AI-RTSB405 5" W x 4" H
(12.7 x 10.16 cm)
7 lbs (3 kg) 1
Qty:  
AI-RTSB409 9" W x 5-5/8" H
(22.86 X 14.28 cm)
12.8 lbs (5.8 kg) 1
Qty:  
AI-RTSB1209 9" W x 10-3/8" H
22.86 x 26.41 cm)
12.8 lbs (5.8 kg) 1
Qty:  

 

PART # CONDUIT SIZE WEIGHT CAPACITY QUANTITY PRICE
Heavy-Duty Strut Clamps for Rigid Pipe, Electro-Zinc Plated
ER-RIGD0050EG 1/2" 400 lbs (181.4 kg) 100
Qty:  
ER-RIGD0075EG 3/4" 600 lbs (272.1 kg) 100
Qty:  
ER-RIGD0100EG 1" 600 lbs (272.1 kg) 100
Qty:  
ER-RIGD0125EG 1-1/4" 600 lbs (272.1 kg) 50
Qty:  
ER-RIGD0150EG 1-1/2" 800 lbs (362.8 kg) 50
Qty:  
ER-RIGD0200EG 2" 800 lbs (362.8 kg) 50
Qty:  
ER-RIGD0250EG 2-1/2" 800 lbs (362.8 kg) 25
Qty:  
ER-RIGD0300EG 3" 800 lbs (362.8 kg) 25
Qty:  
ER-RIGD0350EG 3-1/2" 1000 lbs (453.5 kg) 25
Qty:  
ER-RIGD0400EG 4" 1000 lbs (453.5 kg) 25
Qty:  
ER-RIGD0500EG 5" 1000 lbs (453.5 kg) 25
Qty:  
ER-RIGD0600EG 6" 1000 lbs (453.5 kg) 25
Qty:  
Universal Strut Clamps for EMT Conduit and Rigid Pipe, Electro-Zinc Plated
ER-SK85I 1/2" 200 lbs (90.71 kg) 100
Qty:  
ER-SK125I 3/4" 200 lbs (90.71 kg) 100
Qty:  
ER-SK165I 1" 200 lbs (90.71 kg) 100
Qty:  
ER-SK205I 1-1/4" 200 lbs (90.71 kg) 50
Qty:  
ER-SK245I 1-1/2" 200 lbs (90.71 kg) 50
Qty:  
ER-SK325I 2" 200 lbs (90.71 kg) 50
Qty:  
ER-SK405I 2-1/2" 350 lbs (158.7 kg) 50
Qty:  
ER-SK485I 3" 350 lbs (158.7 kg) 50
Qty:  
ER-SK565I 3-1/2" 350 lbs (158.7 kg) 25
Qty:  
ER-SK645I 4" 350 lbs (158.7 kg) 25
Qty:  
  • Wide range of heavy duty strut clamps are available for easily securing pipes and conduit to any roof topper
  • Available in different designs to suit your needs:
    • Standard Base with Strut Installed: Pyramid-shaped base with strut; several sizes available
    • Split Base with Strut Installed: Base is split into two parts to facilitate water flow; good choice for wetter climates
    • Strut Attached with End Clamp: User has easier access for disassembling and reassembling struts without removing conduit
    • Strut with Threaded Rod: Standard base and strut with a threaded rod that raises conduit higher than the standard level
    • Base Only: Replacement base for the Roof Topper
  • Heavy duty UV resistant plastic stands up to the most extreme rooftop heat for high performance in any application
  • Ideal for installing 4” or larger conduit runs on any rooftop
  • Proudly made in the USA US flag

 

Property Value
Color Black Base, Steel Support
Material Recycled Plastic and Steel
Load Rating 1000 lbs

 

Part # Dimensions Weight Load Capacity Quantity Price
AI-RTS4 9" W x 5-5/8" H
(22.86 X 14.28 cm)
28.9 lbs (13.1 kg) 1000 lbs (453 kg) 1
Qty:  
AI-RTS421 21" W x 5-5/8" H
(53.34 x 14.28 cm)
31.55 lbs (0.59 kg) 1000 lbs (453 kg) 1
Qty:  
AI-RTS402 9" W x 4-7/8" H
(22.86 x 12.38 cm)
28.9 lbs (13.1 kg) 1000 lbs (453 kg) 1
Qty:  
AI-RTSE405 5" W x 4" H
(12.7 x 10.16 cm)
13.1 lbs (5.9 kg) 2000 lbs (907 kg) 1
Qty:  
AI-RTSE409 9" W x 4" H
(22.86 x 10.16 cm)
11.5 lbs (5.2 kg) 2000 lbs (907 kg) 1
Qty:  
AI-RTSE1209 9" W x 12" H
(22.86 x 30.48 cm)
20.8 lbs (9.4 kg) 1000 lbs (453 kg) 1
Qty:  
AI-RTS12 9" W x 12" H
(22.86 x 30.48 cm)
19.25 lbs (8.7 kg) 1000 lbs (453 kg) 1
Qty:  
AI-RTS1221 21" W x 12" H
(53.34 x 30.48 cm)
39.35 lbs (17.8 kg) 1000 lbs (453 kg) 1
Qty:  
AI-RTSB405 5" W x 4" H
(12.7 x 10.16 cm)
7 lbs (3 kg) 1000 lbs (453 kg) 1
Qty:  
AI-RTSB409 9" W x 5-5/8" H
(22.86 X 14.28 cm)
12.8 lbs (5.8 kg) 1000 lbs (453 kg) 1
Qty:  
AI-RTSB1209 9" W x 10-3/8" H
22.86 x 26.41 cm)
12.8 lbs (5.8 kg) 1000 lbs (453 kg) 1
Qty:  

No Manuals Available



RELATED ARTICLES -



 

VIEW OUR GLOSSARY

 

Application of a beam clampArlington Industries Steel and Iron Beam Clamps
From
Designed to attach cable support systems to beams and purlins without soldering or drilling, these steel and iron clamps can support up to 600 lbs.
Access Cable Tray Raised Floor SystemAccess Cable Trays® Raised Floor Cable Tray System
From
Perfect for new installs or retrofits, this access floor cable tray system uses a standard 2' x 2' raised floor grid, but allows you to keep cables as little as 2 inches below the floor surface for easy access during maintenance and updates.
 
Rooftop Support from Cooper B-LineCooper B-Line Dura-Blok™ Rooftop Support Solutions
From
Perfect for use with pipes, cable tray, walkways and HVAC equipment, these durable rubber block supports stand up to weather and dampen vibration while holding components on the roof with no nails or adhesives.
EMT ConduitBulk EMT Conduit
From / 100'
Unthreaded raceway made of galvanized steel. Easy to cut and easy to bend - reducing waste and installation time. Metal conduit is non-combustible and adapts easily to future wiring changes

Do you have any question about this product?
Let our experts and customers resolve all your doubts

Did you know that we can give you a quote for most of our products, including shipping?


You can also call us toll free 866.222.0030

What can make this page better?

We do everything we can think of to provide you with the product specs, images and ordering info you need, but if we're missing something or still have room to improve, please let us know. Your comments, suggestions and questions are the best tools we have for serving you better!