Home > Fire Protection > Detectors and Alarms > 3M Macurco Gas Detection > Macurco™ Detection and Ventilation Control Panel DVP-120
3M™ Macurco™ Detection and Ventilation Control Panel
Centralized Monitoring and Control Over Gas Detection Equipment and Exhaust Fans
![]()
3M™ Macurco™ Detection and Ventilation Control Panel
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player |
What's special about this exhaust fan and multiple gas detection controller?
Establishments with enclosed parking garages, maintenance, or warehouse facilities that use machines and/or automobiles with gas powered combustible engines are required by building codes to incorporate exhaust fans to remove the buildup of harmful gases. This is necessary for keeping employees and visitors alike from becoming victims of deadlyl gases like carbon monoxide or nitrogen dioxide. More |
Using exhaust fans 24/7 becomes a costly expense on two levels: energy cost and exhaust fan replacement. Using the 3M™ Macurco™ Detection and Ventilation Control Panel allows you to safely monitor and be on alert for harmful gas buildup, while automatically controlling your exhaust fans. By doing this, you can reduce the usage of your exhaust fans by up to 22 hours a day, greatly lowering your energy consumption and extending their lives.
- Modular connectors are clearly labeled for fast and reliable hook up of gas detection sensors
- Conduit pass-through holes provided for each connector, allowing easy cable management and wire connection
- On-board driver circuits available for controlling early warning devices, such as horn and strobe alarm signals
- Clearly visible LED indicator lights provide system, alarm, and relay status
- LCD panel allows you to supervise the status of each sensor and their individual gas levels
- Lockable NEMA 1 type enclosure provides general indoor protection from unwanted use or access of your equipment and wiring
- Simple operation with no regular maintenance required
- Compatible with 3M-CM-4, 3M-ND-2, and 3M-GT-11A gas detectors
- ETL listed
- Conforms to UL Standard 508
- Made in USA
| PART# | 3M-DVP-120 |
| Price | |
| Size | 10" W x 12" L x 2" D |
| Weight | 6.5 lbs |
| Power Input 100-240 VAC | 1 Amp |
| Output Control Relays | 3 |
| Relay Rating | 16 Amps |
| Relay Rating | 240 Volts |
| CO Transducer Range | 0-250 ppm |
| NO Transducer Range | 0-9.0 ppm |
| EX Transducer Range | 0-10,000 ppm |
| Relay Turn ON Delay | 0-15 minutes |
| Relay Turn OFF Delay | 0-15 minutes |
| Input Channels | 12 analog |
| Fan/Alarm relays | 3 16A, 240 VAC SPDT |
| Enclosure Style | NEMA 1 |
| UL Standard | UL 508A |
| ETL Listed | Yes |
| PART# | 3M-CM-4 |
| Price | |
| CO-Range | 0-250 ppm |
| Output Range | 1.00-2.88 VDC or 4-24 mA for 0-250 ppm of CO |
| Output Type | DC Voltage or 4-20 mA constant current loop |
| Required Power Supply | 12-24 VDC or 12-24 VAC |
| Power Consumption | 2.2 W @ 24 VDC |
| Operating Temperature Range | 0-125° F |
| Color | Gray |
| PART # | 3M-ND-2 |
| Price | |
| Power | 1.2 Watts from 12 to 24 VAC or VDC |
| Relay | 5 Amps, 240VAC, pilot duty, SPDT |
| Relay Set Point | 0.5 to 3.0 ppm |
| Operating Temperature Range | 0-125° F, 10-90% RH |
| Linearity | within 1% |
| Accuracy | ± 3% after calibration |
| Sensor Output Drop | Less than 2% a month |
| Coverage | 5,000 sq ft per unit |
| Color | Gray |
| PART # | 3M-GT-11A |
| Price | |
| Input Voltage | 24 VAC or 24 VDC |
| Typical Current Usage | 130 mA @ 24 VAC, 90mA @ 24 VDC |
| Operating Temperature Range | 0 to 125° F and 10 to 90% (non-condensing) |
| Current Output | 4 to 20 mA |
| Voltage Output | 1 to 5 V |
| Range | 0 to 10,000 ppm of methane (standard calibration) |
| PART # | DESCRIPTION | PRICE |
| 3M-DVP-120 | Macurco Detection and Ventilation Control Panel | |
| Gas Transducers | ||
| 3M-CM-4 | Macurco Carbon Monoxide Gas Detector and Transducer | |
| 3M-ND-2 | Macurco Nitrogen Dioxide Gas Detector and Transducer | |
| 3M-GT-11A | Macurco Combustible Gas (Methane, Natural Gas, LP, Propane) Detector and Transducer | |
MANUALS & USER GUIDES -
- DVP-120 Features & Specs (PDF)

- DVP-120 Operation Manual (PDF)

- CM-4 Data Sheet (PDF)

- ND-2 Installation Instructions (PDF)

- ND-2 Operation Manual (PDF)

- GT-11A Installation Instructions (PDF)

- GT-11A Operation Manual (PDF)

RELATED ARTICLES -
- Energy Conservation (PDF)

- Creating a Fire Protection Plan for Your Business
- On-the-Job Ergonomics for Electrical Contractors
- How to Maintain Smoke Alarms
- Energy Saving Tips for Businesses



Bulk EMT Conduit
Black Box Technician's Tool Kit
